Advertisement
3) Powering on your sauna
1. Plug in the power cord to the electrical outlet. All lights on the LED Control Panel will flash once.
2. During Off mode, nothing will display.
3. We recommend turning the sauna on for the maximum time and temperature in order to burn off any factory dust before
using your sauna for the first time. For maximum performance of the heaters, cycle your sauna (turn on to max temperature
and run for one hour) 2-3 times.
4) Starting up your sauna
1. Tap and hold the Power button for approximately 5
seconds to start up your sauna.
2. The temperature display will indicate the current cabin
temperature. If the ambient temperature within the cabin
is below 90ºF/30Cº, the display will read "LO."
B. Getting started
3. The time display will indicate the sauna session time. When
the time button is tapped, it will change the time in five-
minute increments. The maximum session time is 60
minutes.
4. The Light button will illuminate to indicate that the
interior LED panel is turned on. To turn Off, simply tap Light
again.
The controller is touch sensitive, so you must hold down the
power button for 2-3 seconds.
Salus Saunas | 12
© Finnmark Designs
Advertisement
