Advertisement
CONTROLS AND FUNCTIONS
4
www.PyleUSA.com
1. [GUITAR] Controller, control the input level of guitar channel, adjust to balance the volume.
2. [SIG] Signal Indicator, the brightness will change with the intensity of the signal input.
3. [PEAK] LED, it will light up when the input signal is too high. When the LED light will keep
ashing, please rotate the [MIC] Controller counterclockwise to turn down the volume.
4. [MIC] Controller, control the input level of mic channel, adjust to balance the volume.
5. [MONITOR] Controller, used to adjust the volume of MONITOR output.
6. [+48V PHANTOM POWER] Button/LED, when the button is turned on, the LED light is on,
provide DC+48V phantom power to XLR plug on MIC mono input.
Please turn ON this button when using the condenser microphone which is powered by a
phantom power.
7. [PC USB] Controller, control the input level from PC USB port, adjust to balance the volume.
8. [POWER ON] LED, it will light up when the mixer's power is on.
9. [CLIP L & R] LED, they will light up when the MONITOR output signal is too high.
10. [PHONES] Controller, control the volume of earphones.
11. [MIC INPUT] Converting switch:
a. When it is bounce up, it is for STEREO input, connect MIC 1 and MIC 2 input, MIC 1 is
channel L, MIC 2 is channel R, compose to the stereo signal.
b. Press it down, it is for MONO input, the signal of MIC 1 and MIC 2 are separately.
12. [GUITAR INPUT] Converting switch:
a. When it is bounce up, it is for STEREO input, connect GUITAR 1 and GUITAR 2 input,
GUITAR 1 is channel L, GUITAR 2 is channel R, compose to the stereo signal.
b. Press it down, it is for MONO input, the signal of GUITAR 1 and GUITAR 2 are separately.
13. [MIC] Input jack, connect the microphone with XLR PLUG.
14. [GUITAR] Input jack, for connecting to an Instrument, such as electric guitar or electric
bass.
5
www.PyleUSA.com
Advertisement
