Advertisement
Quick Links
Advertisement
Related Manuals for Pyle PVRC52
Summary of Contents for Pyle PVRC52
- Page 2 HD VIDEO CAPTURE With this PVRC52 HD Video Capture, you can capture up to 1080P video from HDMI, Ypbpr (component) or composite port, such as blue ray, set-top-box, computer, game box, VHS, etc. With remote control, can set input signal manually, recording quality, or capture a still image by SNAPSHOT button.
- Page 3 CONNECT WITH HDMI INPUT SOURCE: 1.Connect power with DC adaptor 2. Plug an USB disk or a SD card (Note: PVRC52 will only recognize the rst storage device if you connect USB disk and SD card both). 3.Use HDMI cable connect Xbox or other source.
- Page 4 4. With HDMI cable connect to monitor 5. The “LINE OUT” is used to connect speaker or earphone, this will not be necessary if you use the HDMI output because it’s already enabled with audio output. 6. You can connect your microphone to record your comment when playing game, it’s not necessary if you don’t need it.
- Page 5 Go settings---System disable “Enable HDCP” option: CONNECT WITH YPBPR COMPONENT VIDEO SOURCE SUCH AS DVD PLAYER, PS3. ETC : 1. Connect power with DC adaptor 2. Use the adapter cable in the package to connect component (red, blue, green), just don’t mix the red with the audio cable (the audio cable red and white will be separated with component) www.PyleUSA.com...
- Page 6 PS3 SETTING: FOR THE COMPONENT INPUT Go to the settings---Video output settings, choose “Component/D- Terminal”: At the resolutions setting, make sure the “1080P” option is NOT be ticked, otherwise some game play (e.g. GT5) cannot be recorded by PVRC52: www.PyleUSA.com...
- Page 7 CONNECT WITH COMPOSITE VIDEO SOURCE SUCH AS PS2, VHS, V8, HI8, ETC : 1. Connect power with DC adaptor 2. Connect the composite (yellow cable and red white audio cable) to your video source with the adapter cable come with the package. 3.
- Page 8 1. The input video source disconnected. 2. The USB drive is out of memory. 3. The format for USB drive is not suitable, e.g. exFAT. PVRC52 support FAT, FAT32, and NTFS. 4. The USB drive is not connected well.
- Page 9 1080p video), when you record a video more than 1.95GB (15 minutes), PVRC52 will partition it in more than 1 le, for example: if you record a 45 minutes 1080p video by one click recording, you will see 3 les: Encode_1080P_1, Encode_1080P_1_1, Encode_1080P_1_2…and so on...
- Page 10 3. Change the date: you may nd out that the date of the recorded le is not synchronous with your local time. To change the time of PVRC52, you need create a TXT le name “rtc_setup” type your local date and...
- Page 11 1. You can combine two or more video in one, just drag them into Showbiz: 2. You can cut a video to two or more: www.PyleUSA.com...
- Page 12 3. Click “Produce” after editing, you can create DVD or upload video to YouTube: 4. Please click “Create le” to create multiple les for di erent devices, such as apple, PSP, mobile phone, etc: www.PyleUSA.com...
-
Page 13: Specifications
SPECIFICATIONS: Connections Interface USB 2.0 Host, SD Card Digital: HDMI Video Input Analog: Component Video, Composite Video Digital: HDMI Audio Input Analog: RCA L/R, 3.5mm Micro Phone In Note: Microphone without pass through for HDMI input Digital: HDMI (Pass-through from HDMI, Video Output component or composite) Digital: HDMI (Pass-through from HDMI, L/R) -
Page 14: User Interface
Hardware Extra Codec Hardware H.264 encoder On-board Hot Button for one-click recording User Interface LED indicator for working status Dimensions 142(L)* 74(W)* 23(H) mm Weight 110g Standards USB Flash Disk, Portable Hard Disk, SD Card Storage Media Note: The exFAT format is not supported. Input / Pass-through: 720 x 480 (60p), 720 x 576 (50p), 1280 x 720p (50p), 1280 x 720p(60p), 1920 x 1080 (50i), 1920 x 1080 (60i),... -
Page 15: Video Export
HDCP. This may be illegal in some countries and areas. 2. Why can’t I record video with PVRC52 HD video capture device? - Please make sure your monitor display the video rst. If not, please check all the cables connection, and check your HDMI video source has HDCP protection (like point 2, it that, you can’t get video on your... - Page 16 - Usually USB drive will ash seconds (If your USB drive includes LED inside and if none no LED inside) when you just plug it into PVRC52 device, then turn o . And it will ash after you press REC button to start recording, if not, it means not recording.
- Page 17 - Please right click Sound icon, and select Playback device, and set PVRC52 to be default device. You will get recording video without audio if you don’t set this. www.PyleUSA.com...
- Page 18 Get below picture, and don’t tick Dolby and DTS, then save the setting. GUIDE FOR OBS PVRC52 HD Video Capture device working with OBS can record video on computer, and stream HD video. OBS is an open source and free software for video recording and stream- ing, Live RTMP streaming to Twitch, YouTube, DailyMotion, Hitbox and more.
- Page 19 Double click “DrvInstall” Click “Next’ then click “Finish”. www.PyleUSA.com...
- Page 20 Device then will be installed successful: www.PyleUSA.com...
- Page 21 Notice: Caused by Availability of SHA-2 Code signing Support, maybe driver installation has the problem for Windows7/64bit OS. Find “Win- dows6.1-KB3033929-x64.msu” in software CD, and run it to solve the problem according to Microsoft Security Advisory 3033929. If you installed the wrong drivers and can’t re-install the right drivers, please run the “DrvUninstall.exe”...
- Page 22 Choose “Video Capture Device”. Click “OK”. Connect the video source to PVRC52 device. Choose “IT9910 Capture Filter (HD)” in Device select box, then click “OK”, you may see the video of your source now (for HDMI input). www.PyleUSA.com...
- Page 23 Choose from the input select box “0: Video ParallelDigital In” is for HDMI input. “1: Video YRYBY In” is for Component Video (YPbPr) input. “3: Video Composite In” is for Composite Video (CVBS) input. Normally you need to restart OBS Studio after change the input source, then will show up the video.
- Page 24 4. Video Recording: After following the setting above and the video started to show, simply click ”Start Recording” to record video, and click “Stop” to stop recording video. Check the recorded documents: www.PyleUSA.com...
- Page 25 You can set the record resolutions: Set the format and save path here (settings—Output---Recording): www.PyleUSA.com...
- Page 26 You can record your comment by you microphone of computer with video: Settings – Audio - Mic/Auxiliary audio Device, choose Default, then click “OK”. On some computer, you may found the recording video no sound, do following settings to x: Set the Audio - Sample Rate to 44.1khz，...
- Page 27 Set the Volume of Video Capture Device to 80% at Advanced Audio Properties 5. Video Streaming Go to Setting - Stream, set the Service by Choose the select box: www.PyleUSA.com...
- Page 28 You can choose “Custom Stream Server” if your stream service is not in the list: Type the URL and Stream key of your server: www.PyleUSA.com...
- Page 29 Simply click “Start Stream”, now your video is streaming: www.PyleUSA.com...