Related Manuals for Pyle PSS6
Summary of Contents for Pyle PSS6
- Page 1 PSS6 6 Channel High Power Stereo Speaker Selector 100-Watt Power, Accepts Speaker Wires Up to 14-Gauge...
- Page 2 (see “Impedance Chart” on page PREPARATIONS • Use the PYLE PRO Speaker Selectors only with ampli ers rated at 100 watts per channel or less. • Your PYLE PRO Speaker Selector is designed to accept any size cable up to 14 gauge non-terminated speaker wire.
-
Page 3: Making The Connections
If you’re using non-terminated speaker wire, do not use any speaker wire that is larger than 14 gauge. The lower the gauge number, the larger the cable (e.g., 12 gauge is larger in actual physical size than 14 gauge). • Do not hook the outputs of one selector into the inputs of another speaker selector together. -
Page 4: Operation
Press open the AMP terminals on the control center, then insert your receiver/ ampli er’s positive (+) wires into the positive (red) terminals, and negative (-) wires in the nagative terminals. Then press the tabs to close them. Notes: • If your receiver/amplifier has more than one set of speaker terminal (A and B), connect only one or the other to the control center. - Page 5 Features: • Up to 6 Separate Speaker Pairs to Your Stereo System • Accepts Speaker Wires up to 14-Gauge • Handles 100Watts per Channel w/ Speaker Systems • Minimum Impedance of 8 Ohms • Protection Circuitry Keeps It Running Smoothly •...
- Page 6 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...