Disc Operations; Basic Playback; General Operation; Pausing Playback - Yamaha DVD-S657 Owner's Manual

Disc Operations

IMPORTANT!
– If the inhibit icon (
on the TV screen when a button is
pressed, it means the function is
not available on the current disc or
at the current time.
– Depending on the DVD or VIDEO
CD, some operations may be
different or restricted.
– Do not push on the disc tray or put
any objects other than disc on the
disc tray. Doing so may cause the
disc player malfunction.

Basic Playback

1 Press STANDBY/ON on the front panel
to turn on the DVD player.
2 Press OPEN/CLOSE / on the front
panel to open disc loading tray.
3 Place the chosen disc in the tray, with the
label facing up.
4 Press OPEN/CLOSE / again to close
the tray.
After recognizing this disc, the player
begins to play back automatically.
If you press PLAY ( B ) when the tray
is open, this unit closes the tray and
starts playback.
TIPS: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
14
or X) appears

General Operation

Unless otherwise stated, all operations
described are based on Remote Control
use.

Pausing playback

1 During playback, press PAUSE ( ; ).
Playback will pause and sound will be
muted.
2 Press PAUSE ( ; ) again to select the
next picture frame.
3 To resume normal playback, press
PLAY ( B ).

Selecting track/chapter

• Press S / T or use the numeric
buttons to key in a track/chapter
number.
If repeat mode is active, pressing S /
T will replay the same track/chapter.

Searching backward/forward

• Press and hold S / T, then press
PLAY ( B ) to resume normal
playback.
While searching, pressing S / T
again will decrease/increase the search
speed.

Stopping playback

• Press STOP ( 9 ).