Setups Before The Initial Playback - Yamaha DVD-S1500 Owner's Manual

Setups before the initial
playback
We recommend to setup some of the basic menu items
before the initial playback.
1 Press STANDBY/ON
2 Press ON SCREEN.
On-screen menu is displayed on the screen.
3 Follow the procedure described below to set the
following menu items.
1Menu Language (see page 14)
You can select the language displayed in the On-screen
menu.
1 Go to [Menu Language] (Setup
Language) by using v w t u buttons on the remote
control, then press u.
Choices are displayed on the right column.
2 Select a language to be displayed in the On-screen menu
by using v w buttons.
3 Press t to return to the previous menu.
2Default Audio (see page 14)
You can select the audio language spoken in video discs.
Available choices are determined by the disc.
1 Go to [Default Audio] (Setup
Audio) by using v w t u buttons on the remote control,
then press u.
Choices are displayed on the right column.
2 Select a language by using v w buttons.
3 Press t to return to the previous menu.
3Default Sub-title (see page 14)
You can select the subtitle language set as default.
Available choices are determined by the disc.
1 Go to [Default Sub-title] (Setup
Sub-title) by using v w t u buttons on the remote
control, then press u.
Choices are displayed on the right column.
ON SCREEN
/I to turn on the unit.
Language Menu
Language Default
Language Default
2 Select a default subtitle language by using v w buttons.
3 Press t to return to the previous menu.
4TV shape (see page 12)
You can select the aspect ratio of the video displayed on
the TV monitor.
Select [Wide-screen] if you connect to a wide-screen
monitor. If you connect to a conventional monitor, select
[4:3 Pan Scan] (the left and right sides are trimmed when
you play 16:9 video) or [4:3 Letterbox] (black areas
appear at the top and bottom when you play 16:9 video).
1 Go to [TV Shape] (Setup
v w t u buttons on the remote control, then press u.
Choices are displayed on the right column.
2 Make a choice by using v w buttons.
3 Press t to return to the previous menu.
5Analog output (see page 13)
Enables you to specify the type of analog output suitable
for your AV receiver. Select [Multichannel] if you are
using a multi-channel AV receiver with 6-ch discrete
inputs. If your AV receiver does not have 6-ch discrete
inputs, select one of [Stereo], [Dolby Surr-compat], or
[3D Sound].
1 Go to [Analog output] (Setup
output) by using v w t u buttons on the remote
control, then press u.
Choices are displayed on the right column.
2 Select an item for the analog output signal by using v w
buttons.
3 Press t to return to the previous menu.
6Digital output (see page 13)
Enables you to specify the type of digital output suitable
for your AV receiver. Select [PCM only] if your AV
receiver is not capable of decoding multi-channel audio.
Select [All] if you connected this unit's digital out jacks to
a multi-channel AV receiver.
1 Go to [Digital output] (Setup
output) by using v w t u buttons on the remote
control, then press u.
Choices are displayed on the right column.
2 Select an item for the digital output signal by using v w
buttons.
3 Press t to return to the previous menu.
Note:
– Press ON SCREEN again to exit from the On-screen
menu.
– You can find the selection of the helpful menu items in
[Preference] and [Setup].
Go to [Preference] if you want to customize this unit for
your personal requirement such as the Wake-up timer.
Go to [Setup] if you want to set the operational status of
this unit.
Preparation
TV TV shape) by using
Audio Menu Analog
Audio Menu Digital
9