Playback; Basic Operation; Before Starting Playback - Yamaha DVD-C996 Owner's Manual

PLAYBACK

Before Starting Playback

To play a disc properly, you need to adjust the formats of audio and video signals output from this unit in accordance with the
equipment connected to this unit. See p.25 to 30 for more detailed information.
CAUTION
• Be sure to select the appropriate positions at '7 Digital Audio Output' on the SETUP MENU. Otherwise, there may be
a case where digital signal which the connected equipment cannot process will be output and its noise could damage
your ears and your speakers.
6 TV Aspect
7 Digital Audio Output
• To output digital signal
from this unit
• To output analog signal
from this unit
• Adjust some other settings such as on-screen display language, ratings, etc. as necessary. See SETUP MENU (p.25 to 30)
for detail.
12

BASIC OPERATION

Type of the connected video monitor
Conventional type
Widescreen type
The connected audio
equipment has
96-kHz/24-bit D/A converter
Dolby Digital decoder
DTS decoder
MPEG decoder
Notes
• When you select 'No' at 1. PCM Down Conversion, digital signal may not be output
depending on the disc you play.
• Make sure to connect digital terminals of both this unit and the audio equipment as
instructed on page 9.
Item in '7 Digital Audio Output'
1. PCM Down Conversion
2. Dolby Digital
3. DTS
4. MPEG [Europe and U.K. models only]
Appropriate setting
1. 4:3
2. 16:9
Corresponding item
1. PCM Down
Conversion
2. Dolby Digital
3. DTS
4. MPEG [Europe and
U.K. models only]
Appropriate setting
No
PCM
Off
PCM
Appropriate setting
No
Bitstream
Bitstream
Bitstream