Table of Contents
Advertisement
6.
Prepare the storage box containing the dispenser and marking module assembly. (*A set of
boxes comprises two storage boxes.)
For replacing one unit's worth of a specific ink color, one set of storage boxes is required.
(Use one box for storing the marking module assembly, and the other box for storing the toner
cartridge and dispenser unit.)
(1) Place the storage box containing the dispenser with its upper lid turned upside down.
(2) Place the storage box containing the marking module assembly with its upper lid turned
upside down.
(3) Remove the marking module assembly stand from the upper lid of the storage box.
(4) Place the marking module assembly stand as shown in the figure below on the upper lid of
the marking module assembly storage box that was placed in step (2).
Do not place work objects directly on the floor. Be sure to use the
storage boxes.
Contamination on the marking module assembly, for example, leads to
poor image quality.
17
Advertisement
Table of Contents
