Table of Contents
Advertisement
5.
Remove the marking module cover.
(1) Loosen the three screws marked in yellow on the marking module cover. During this
operation, take care to prevent the screws from coming loose.
Loosen the three screws marked in red, and lift the cover up by holding the square holes
"Y" and "K" to remove the marking module cover. (Do not remove the screws.)
Take care not to excessively loosen the screws marked in yellow. The
screws will fall down if loosened excessively.
(2) After the marking module cover is removed, place it flat on the floor to the right of the
machine with its top surface facing up.
16
Advertisement
Table of Contents
