Konica Minolta PULSOX-300i Instruction Manual page 4

Oxygen saturation monitor
Table of Contents

Advertisement

CAUTION
(Failure to adhere to the following points may result in injury or damage to the in-
strument or other property.)
Do not use batteries other than those specified by
KONICA MINOLTA, INC. When installing batteries
in the instrument, make sure that they are correctly
oriented according to the
If alkali fluid from the battery comes in contact with
eyes, skin, or clothing, immediately wash the affect-
ed area and see a physician for treatment.
Do not use probes other than those specified by
KONICA MINOLTA, INC. Use of alternative probes
may cause the probe to overheat, resulting in burns.
Do not operate the instrument for long periods of
time with the probe attached to a patient. Low-
temperature burn, redness or rash may result. If you
feel pain or itchiness, stop use of the instrument im-
mediately and consult a doctor. A doctor should also
be consulted before using the instrument on patients
with high fever, those with peripheral blood circula-
tion problems or those with sensitive skin.
When attaching the probe to a patient for use during
sleep, care must be taken to avoid the cable from
becoming twisted around the neck of the patient, for
instance when he/she turns over.
2
mark.

Advertisement

Table of Contents
loading

Table of Contents