Memory Recall; Home Channel Memory - Yaesu VX-2R Operating Manual

M M
EMORY
R
EGULAR

Memory Recall

1. While operating in the VFO mode, press the [ V/M ] key to enter
the Memory mode.
2. Rotate the DIAL knob to select the desired channel.
3. To return to the VFO mode, press the [ V/M ] key.

HOME Channel Memory

A special one-touch "HOME" channel is
available for each of operating bands, to
allow quick recall of a favorite operating
frequency /on each band.
Home Channel storage is simple to ac-
complish:
1. Select the desired frequency, while
operating in the VFO mode. Be sure
to set up any desired CTCSS or DCS
tones, as well as any desired repeater
offset. The power level may also be
set at this time, if you wish to store it.
2. Press and hold in the [ F/W ] key for one second.
3. While the memory channel number is blinking, just press the [ HM/RV ] key. The fre-
quency and other data (if any) will now be stored in the special HOME channel regis-
ter.
4. You may repeat this process on the other operating bands.
5. To recall the HOME channel, press and
hold in the [ HM/RV ] key for one second
while operating either in the VFO or MR
mode.
The UHF HOME channel is the
one used during "Emergency" operation. See page 31 for details regarding
this feature.
38
ODE
M
EMORY
C O
HANNEL PERATION
D
EFAULT
B
AND
BC Band
SW Band
50 MHz Ham Band
FM BC Band
Air Band
144 MHz Ham Band 146.520 MHz 144.000 MHz
VHF-TV Band
Action Band 1
430 MHz Ham Band 446.000 MHz 430.000 MHz
UHF-TV Band
Action Band 2
USA Version
VX-2R O
H C
OME HANNELS
F
REQUENCY
USA V EXP V
ERSION
0.540 MHz 0.540 MHz
1.800 MHz 1.800 MHz
30.000 MHz 30.000 MHz
59.000 MHz 88.000 MHz
108.000 MHz 108.000 MHz
174.000 MHz 174.000 MHz
230.000 MHz 230.000 MHz
470.000 MHz 470.000 MHz
860.000 MHz 860.000 MHz
EXP Version
M
PERATING ANUAL
ERSION