Table of Contents
Advertisement
Press the [ V/M ] key momentarily to accept the first digit
J.
and move to the second digit of the DTMF string.
J.
Repeat the previous steps until you have completed the ac-
cess code ("#123").
K. Press the [ H/L ] key momentarily to store the DTMF
memory.
2. Rotate the DIAL knob to select Set Mode Item 23: INT MD.
3. Press the [ H/L ] key to enable adjustment of this Set Mode Item.
4. Rotate the DIAL knob to set this Set Mode Item to "LINK" (thus
activating the "Other Internet Link System" mode).
5. Press the PTT key to save the new settings and exit to normal
operation.
6. Press the [
] key to activate the Internet Connection feature.
The " " icon will appear in the upper right corner of the display. .
7. If you have stored multiple DTMF strings for access to different link nodes, rotate the
DIAL knob, while pressing and holding in the [
register (CH1 - CH9) corresponding to that node's DTMF access string.
8. Whit the Internet Connection feature is activated per step 6 above, you may now press
the [
] key, while you are transmitting, to send out the selected DTMF string (to
establish the link to the desired Internet-link mode).
9. To return to the WIRES™ mode, repeat steps 2 - 5 above.
VX-2R O
PERATING
I
NTERNET
M
ANUAL
C
ONNECTION FEATURE
] key, to select the DTMF Memory
59
Hide quick links:
Advertisement
Table of Contents
