Table of Contents
Advertisement
Removal steps of the antenna assembly (for models with wireless-WAN card)
Step
Screw (quantity)
3
M2 × L2 mm, flat-head, nylon-coated (5)
Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
When installing: ensure that you connect the orange cable to the main connector, the blue cable to the
auxiliary connector, the white and grey cable to the M1 connector, and the black and grey cable to the M2
connector.
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
71
Advertisement
Table of Contents
