Cloning - Vertex Standard VX-110 Operating Manual

Cloning

The VX-110 includes a convenient "Clone" feature, which allows the memory and con-
figuration data from one transceiver to be transferred to another VX-110. This can be
particularly useful when configuring a number of transceivers for a public service opera-
tion. Here is the procedure for Cloning one radio's data to another:
Turn both radios off.
Connect the optional CT-27 cloning cable between the MIC/SP jacks of the two ra-
dios.
Press and hold the PTT and LAMP key while turning the radio on.
Rotate the DIAL to select "
Press the [ F ] key, to enter the CLONE mode. "
both radios when the Clone mode is successfully activated in this step.
On the Destination radio, press the MONI key ("
Press the PTT key on the Source radio; "
and the data is transferred.
If there is a problem during the cloning process, "
your cable connections and battery voltage, and try again.
If the data transfer is successful, the Destination radio will return to normal operation;
Turn both radios off and disconnect the CT-27. You can then turn the radios back on,
and begin normal operation.
30
."
" will appear on the Source radio,
Optional Cloning Cable "CT-27"
VX-110 O
" will appear on the displays of
" will appear on the LCD).
" will be displayed. Check
PERATING
M
ANUAL