Table of Contents
Advertisement
Setting the clock
You can only change the clock when no other clock function is
active.
Press the
clock function button repeatedly until
KJ
1.
the
KJ
and
3
symbols light up.
Set the clock using the rotary selector.
2.
The setting is applied automatically.
Rapid heat up
You can reduce the heating up time for the
and
Bread-baking operating modes if the set temperature is
ë
higher than 100 °C.
Note: During Rapid heat up, do not place any food in the
cooking compartment for as long as the
Childproof lock
In this section, you can read about
how to lock your appliance
■
how to lock your appliance permanently
■
Lock
Once it has been locked, the appliance cannot be switched on
accidentally or by unauthorised users (e.g. by children playing).
To switch the appliance on again, you must unlock it. After
appliance operation, the appliance is not automatically locked.
Lock it again if necessary or activate the permanent lock.
Lock appliance
Switch off the appliance.
1.
Press and hold the
info button for 3 seconds to go to the
±
2.
basic settings menu.
Press the
±
info button briefly and repeatedly until
3.
appears in the temperature display.
Turn the temperature selector until
4.
temperature display.
Press and hold the
info button until the
±
5.
in the temperature display.
Note: If you try to switch on the locked appliance, -
on the temperature display and "controls locked" appears on
the text display.
CircoTherm®
3
symbol is lit.
f
™‚‹
appears on the
™‚‚
symbol appears
‚
- appears
†
Set the operating mode and temperature.
1.
The appliance heats up.
Press the
KJ
clock function button until the
2.
symbols light up and
Œ
Turn the rotary selector clockwise.
3.
Ž
is displayed in the clock display and the
up. Rapid heat up is activated.
After reaching the set temperature, Rapid heat up switches off.
The
symbol goes out.
f
Checking, correcting or deleting settings
To check your settings, press the
1.
repeatedly until the corresponding symbol lights up.
If necessary, you can correct your setting using the rotary
2.
selector.
If you wish to cancel your setting, turn the rotary selector anti-
3.
clockwise to the original value.
Unlocking the appliance
Press and hold the
info button until
±
1.
temperature display.
Turn the temperature selector until
2.
temperature display.
Press and hold the
±
info button until the
3.
out.
Permanent lock
Once it has been permanently locked, the appliance cannot be
switched on accidentally or by unauthorised users (e.g. by
children playing).
To switch the appliance on, you must interrupt the permanent
lock briefly. After you have switched your appliance off, it locks
again automatically.
Locking the appliance permanently
Switch off the appliance.
1.
Press and hold the
info button for 3 seconds to go to the
±
2.
basic settings menu.
Press the
info button briefly and repeatedly until
±
3.
appears in the temperature display.
Turn the temperature selector until
4.
temperature display.
Press and hold the
±
info button for 3 seconds.
5.
Your appliance will be locked after 30 seconds. The
symbol appears in the temperature display
Note: If you try to switch on the locked appliance, -
on the temperature display and "Appliance permanent lock"
appears on the text display.
KJ
and
appears in the clock display.
f
symbol lights
clock function button
KJ
appears in the
™‚‚
appears on the
™‚‹
‚
symbol goes
™‚‹
™ƒ‚
appears on the
†˜
f
‚
appears
11
Advertisement
Table of Contents
