Related Manuals for Husqvarna EZ24T CE
Summary of Contents for Husqvarna EZ24T CE
- Page 1 Operator Manual EZ24T CE / 966659702 Please read the operator manual carefully and make sure you understand the instructions before using the machine. English...
- Page 2 When this product is worn out and no longer used, it should be returned to the reseller or other party for recycling. In order to implement improvements, specifications and designs can be altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs.
-
Page 3: Table Of Contents
CONTENTS INTRODUCTION ............5 Operating On Hills ..........31 Driving and Transport on Public Roads .....5 Mowing Tips .............32 Towing ..............5 Stopping the Engine .........33 Operating ............5 Moving Machine By Hand ........34 Good Service .............6 ZT-2800 Bypass Linkages .......34 Manufacturing Number ........6 MAINTENANCE ............35 SYMBOLS AND DECALS .........7 Maintenance Schedule ........35... - Page 4 WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons.
-
Page 5: Introduction
INTRODUCTION Congratulations Towing Thank you for purchasing a Husqvarna ride-on If machine is equipped with a tow hitch, use extreme mower. This machine is built for superior efficiency caution when towing. Never allow children or others in to rapidly mow primarily large areas. A control panel or on the towed equipment. -
Page 6: Good Service
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer. -
Page 7: Symbols And Decals
SYMBOLS AND DECALS These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. IMPORTANT INFORMATION WARNING! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. xxxxxx xxxxxxxxx. - Page 8 SYMBOLS AND DECALS Shut off engine and remove key before performing Keep a safe Read Operator’s any maintenance or distance from the Use on slopes no Manual repair work machine greater than 10° No passengers Whole body Severing of fingers Do not open or Careful backing up, Careful going...
-
Page 9: Safety
SAFETY Safety Instructions These instructions are for your safety. Read them carefully. WARNING! WARNING! THIS CUTTING MACHINE IS CAPABLE This symbol means that important OF AMPUTATING HANDS AND FEET safety instructions need to be AND THROWING OBJECTS. FAILURE emphasized. It concerns your safety. TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR... - Page 10 SAFETY • Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard. • Operate machine only in daylight or good artificial light.
-
Page 11: Personal Safety Equipment
SAFETY Personal Safety Equipment WARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. - Page 12 SAFETY • Do not try to stabilize the machine by putting a foot on the ground. • Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.
-
Page 13: Safe Handling Of Gasoline
SAFETY Safe Handling of Gasoline To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. WARNING! The engine and the exhaust system become very hot during operation. There is risk for burns if touched. Allow engine and exhaust system to cool before refueling. -
Page 14: General Maintenance
SAFETY General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris buildup. - Page 15 SAFETY Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury. Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery. WARNING! Avoid electrical sparking and its consequences by the following...
-
Page 16: Transport
Spark Arrestor A spark arrestor for the muffler is available through WARNING! any authorized Husqvarna dealer. This mower is equipped with an internal combustion engine and should not be used on or near any unimproved forested, bush covered... -
Page 17: Controls
CONTROLS This operator’s manual describes the Husqvarna Zero driven hydraulic pumps. Using the left and right Turn Rider. The rider is fitted with Briggs & Stratton steering controls, the flow is regulated and thereby the four-stroke overhead valve engine. direction and speed. -
Page 18: Steering Control Levers
CONTROLS Steering Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward. -
Page 19: Parking Brake
CONTROLS Parking Brake IMPORTANT INFORMATION The machine must be not be moving when engaging the parking brake. Always set the parking brake before dismounting. Release the parking brake before moving the mower. The parking brake is found on the left of the machine. Push button and pull the lever backward to activate the brake and push button and push forward to release it. -
Page 20: Ignition Switch
CONTROLS Ignition Switch The ignition switch is placed on the control panel and is used to start and stop the engine. On models equipped with headlights, turn the key clockwise to ACCESSORY for headlight use. 8058-134 Ignition switch Choke Control The choke control is used for cold starts in order to provide the engine with a richer fuel mixture. -
Page 21: Fuel Tank
CONTROLS Fuel Tank Read the safety instructions before refueling. The machine has one fuel tank, just behind the seat. The tank capacity is 4 gallons (15.1 liters). Regularly check the gas cap gasket for damage and keep the cap properly tightened. The engine will run on a minimum of 87-octane unleaded gasoline (no oil mix). -
Page 22: Fuel Shut Off Valve
CONTROLS Fuel Shut Off Valve The fuel shut off valve is located at the left rear of the seat. The valve is off when the handle tab is turned perpendicular to the fuel line. IMPORTANT INFORMATION Always raise the deck to the highest position for transport. -
Page 23: Hour Meter
CONTROLS Hour Meter The hour meter displays the total operating time. It will flash CHG OIL (Change Oil) at 50 hour intervals. The flash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically. -
Page 24: Operation
OPERATION Read the Safety section and following pages, if you Steering are unfamiliar with the machine. To move forward and backward Training The direction and speed of the mower’s movements are effected by the movement of the control lever(s) Due to unique steering capabilities, zero turn mowers on each side of mower. -
Page 25: Before Starting
OPERATION Before Starting 1. Read the sections on Safety and Controls before starting the machine. 2. Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section). 3. Check that there is sufficient fuel in the fuel tank. 4. -
Page 26: Starting The Engine
OPERATION Starting the Engine 1. Sit on the seat. 2. Raise the mower deck by pushing the release button on the top of the lifting lever. Pull the lifting lever backward to the locked (transport) position. 8058-019 Mower deck lifting lever 3. - Page 27 OPERATION 5. Move the steering controls outward to the locked (outer) neutral position. 8058-186 Place controls in neutral position 6. Move the throttle to the middle position. 8058-148 Set the throttle 7. If the engine is cold, the choke control should be pulled up.
- Page 28 OPERATION 8. Press in and turn the ignition key to the start position. IMPORTANT INFORMATION Do not run the starter for more than 5 seconds each time. If the engine does not start, wait approximately 10 seconds before retrying. 8050-780 Turn to the start position 9.
-
Page 29: Weak Battery
OPERATION Weak Battery WARNING! Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. IMPORTANT INFORMATION Your mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12-volt negative grounded system. -
Page 30: Running
OPERATION Running 1. Release the parking brake by pushing the top release button in and moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine. -
Page 31: Operating On Hills
OPERATION Operating On Hills Read Driving on Slopes in the Safety section. WARNING! Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. • The slowest speed possible should be used before starting up or down hills. •... -
Page 32: Mowing Tips
OPERATION Mowing Tips WARNING! • Observe and flag rocks and other fixed objects to avoid collisions. Clear the lawn of stones and other objects that can be thrown out by the • Begin with a high cutting height and reduce it until blades. -
Page 33: Stopping The Engine
OPERATION Stopping the Engine 1. Move the throttle to the minimum position (tortoise symbol). 2. Move the steering controls outward. 3. Disengage the mower deck by depressing the blade switch. 8058-134 Disengage the mower deck and move throttle to minimum 4. -
Page 34: Moving Machine By Hand
OPERATION Moving Machine By Hand ZT-2800 Bypass Linkages When pushing or pulling the mower, engage the ZT-2800 bypass linkages. The ZT-2800 hydro release levers are located on the rear of the frame, below the rear engine guard. 1. Raise the deck into the highest cutting position. -
Page 35: Maintenance
MAINTENANCE Maintenance Schedule an authorized service workshop is recommended to The following is a list of maintenance procedures that maintain your machine in the best possible condition must be performed on the machine. For those points and to ensure safe operation. not described in this manual, visit an authorized Read Maintenance in the Safety section. - Page 36 MAINTENANCE Daily At least Maintenance once interval each in hours year MAINTENANCE Before After ■ Check/adjust throttle cable ● ● Check the condition of belts, belt pulleys ■ ■ Change the engine oil ■ ■ Replace the engine oil filter ■...
-
Page 37: Battery
MAINTENANCE Battery STANDARD STATE APPROXIMATE BATTERY CHARGING TIME* TO FULL CHARGE AT 80 F / 27 Your mower is equipped with a maintenance free BATTERY Maximum Rate at: battery and does not need servicing. However, CHARGE 50 Amps 30 Amps 20 Amps 10 Amps periodic charging of the battery with an automotive... -
Page 38: Safety System
Visually check that no damage is found on the lever, links, or switch belonging to the parking brake. Perform a standstill test and check that there is sufficient braking action. To adjust the parking brake, contact the Husqvarna service workshop. WARNING! Faulty adjustment will result in reduced braking ability and can cause an accident. -
Page 39: V-Belts
MAINTENANCE V-belts Deck Belt Check every 100 hours of operation. Check for severe cracking and large nicks. NOTE: The belt will show some small cracks in normal operation. The belts are not adjustable. Replace belts if they begin to slip from wear. Deck Belt Removal 1. -
Page 40: Pump Belt
MAINTENANCE Pump Belt Replacing pump belt Park the mower on a level surface. Engage the parking brake. Belt removal 1. Remove the deck belt (see Deck Belt Removal in this section of the manual). 2. Create slack in the belt by removing the spring on the pump idler arm. -
Page 41: Cutting Blades
MAINTENANCE Cutting Blades To achieve the best mowing results, it is important that blades are well sharpened and not damaged. Replace blades that have been bent or cracked when hitting obstacles. Let the service workshop decide whether a blade with large nicks can be repaired/ground or must be replaced. -
Page 42: Adjusting The Mower Deck
MAINTENANCE Adjusting the Mower Deck Leveling deck Adjust the deck while the mower is on a level surface. Make sure the tires are inflated to the correct pressure. See Technical Data under Transmission. If tires are under or over inflated, the deck cannot be properly adjusted. -
Page 43: Anti-Scalp Rollers
MAINTENANCE Anti-Scalp Rollers Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti- scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions. -
Page 44: Cleaning
MAINTENANCE Cleaning Regular cleaning and washing, especially under the mower deck, will increase the machine’s life-span. Make it a habit to clean the machine directly after use (after it is cooled), before the dirt sticks. Do not spray water on the top of the mower deck. Use compressed air to clean the top side of mower deck. -
Page 45: Lubrication
LUBRICATION 8051-051 12/12 Every year Filter change Lubricate with grease gun 1/52 Every Week Level check Oil change 1/365 Every day Change transmission filter General It is important to avoid getting lubricant on the belts Remove the ignition key to prevent unintentional movements during lubrication. -
Page 46: Front Wheel Mount
LUBRICATION Wheel and Deck Zerks Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. Front Wheel Mount Lubricate 3-4 strokes with a grease gun on each set of wheel bearings. Front Wheel Bearings Lubricate 3-4 strokes with a grease gun on each set of wheel bearings. -
Page 47: Transaxle (Transmission) Fluid Change
LUBRICATION Transaxle (Transmission) Fluid Change This transaxle is designed with an external filter for ease of maintenance. To ensure constant fluid quality levels and longer life, an oil filter change interval of every 200 hours is recommended. The following procedure is performed with the transaxles installed in the mower and the mower on level ground. -
Page 48: Troubleshooting
TROUBLESHOOTING Problem Cause Engine will not start • Blade switch is engaged. • Steering controls are not locked in the neutral position • Parking brake is not activated • Battery is dead • Contamination in the carburetor or fuel line. •... - Page 49 TROUBLESHOOTING Problem Cause Engine overheats • Clogged air intake or cooling fins • Engine overloaded • Poor ventilation around engine • Defective engine speed regulator • Too little or no oil in the engine • Contamination in the carburetor or fuel line. •...
-
Page 50: Storage
Drain the fuel into an Always use genuine Husqvarna spare parts. approved container outdoors and far An annual check-up at an authorized service away from open flame. Store the fuel... -
Page 51: Schematics
SCHEMATIC... -
Page 52: Technical Data
TECHNICAL DATA EZ24T \ 966659702 Engine Manufacturer Briggs & Stratton Type Endurance Power 14.65 kW @ 3150 RPM Lubrication Pressure with oil filter Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%) Fuel tank capacity 4 gallons / 15.1 liters Cooling Air cooled Air filter... - Page 53 TECHNICAL DATA EZ24T \ 966659701 48" Combi Deck Frame Cutting Width 122 cm / 48" Cutting Height 3.8 - 11.4 cm / 1½ - 4½" Uncut Circle Number of Blades Blade Length 41.9 cm / 16½" Nose Rollers Sprung Seat Standard Hinged Arm Rests Standard...
-
Page 54: Accessories
TECHNICAL DATA Accessories Collection system Torque Specifications Engine crankshaft bolt 50 ft/lb (67 Nm) Standard " fasteners 18 ft/lb (25 Nm) Deck pulley bolts 150 ft/lb (203 Nm) Standard " fasteners 33 ft/lb (44 Nm) Lug nuts 75 ft/lb (100 Nm) Standard "... -
Page 55: Conformity Certificates
See the Declaration of Conformity Certificate for additional information. Husqvarna AB, Orangeburg, SC, USA declares under sole responsibility that the machine types stated on page 1 of this manual, from 2012's serial numbers and onwards (the year is clearly stated in plain text... -
Page 56: Service Journal
SERVICE JOURNAL Action Date, mtr reading, stamp, sign Delivery Service Charge the battery. Adjust the tire pressure of all wheels to 15 PSI (1 bar). Mount the steering controls in the normal position. Connect the contact box to the cable for the seat’s safety switch. Check that the right amount of oil is in the engine. - Page 57 SERVICE JOURNAL Action Date, mtr reading, stamp, sign After the first 5-8 hours Change the engine oil. 25-Hour Service Check the engine air filter. Sharpen/Replace mower blades if required. Check the tire pressures. Check battery cables. Lubricate according to lubrication chart. Check/clean the engine’s cooling air intake.
- Page 58 SERVICE JOURNAL Action Date, mtr reading, stamp, sign 50-Hour Service Perform the 25-hour service. Clean/replace the air cleaner’s filter cartridge (paper filter (shorter intervals for dusty operating conditions). Change engine oil. Lubricate according to lubrication chart. Check/adjust the parking brake. 100-Hour Service Perform the 25-hour service.
- Page 59 SERVICE JOURNAL Action Date, mtr reading, stamp, sign 300-Hour Service Perform the 25-hour service. Perform the 50-hour service. Perform the 100-hour service. Check/adjust the mower deck. Clean the combustion chamber and grind the valve seats. Check the engine valve clearance. Replace the air cleaner’s pre-filter (foam).
- Page 60 SERVICE JOURNAL Action Date, mtr reading, stamp, sign...
- Page 61 SERVICE JOURNAL Action Date, mtr reading, stamp, sign...
- Page 62 SERVICE JOURNAL Action Date, mtr reading, stamp, sign...
- Page 64 Original instructions 115 38 47-27 Rev D 2012-01-18...