Advertisement
6.3.6 Move Steering (optional)
The Move Steering function allows you to steer one actuator in a dual actuator
system individually. It is not a required step for initial setup.
To use this function, select Move Steering, then select either Move port steering
or Move stbd steering. Once in this mode, turning the helm will move the
selected steering actuator.
If the actuators are calibrated, backing out of the Move Steering mode and turning
the helm will cause the actuators to auto-align.
6.4
Sea trial
Refer to the sea trial instructions in Book 65 — System Setup and Configuration Guide.
If you do not have this book, contact MarineTech@dometic.com for a copy.
In addition to the instructions in Book 65:
Steer to an indicated 0° at cruising speed. If the boat is not tracking straight,
perform the straight line correction in section 6.3.3.
32
Electric Inboard Steering Actuator
EN
Advertisement
