Advertisement
Sport Tilt helm EH1565
8
NUT
TORQUE TO
150 IN-LBS
SHAFT KEY
LIGHTLY
GREASE
SHAFT
TILT
MECHANISM
Ground strap
In all helm applications: install one end of the ground strap between the nut and
washer on the helm's mounting stud as shown. Connect the other end to a ground
point on the boat. This could be a negative bus bar, the negative terminal of the
battery, or a designated grounding terminal.
12
STEERING
WHEEL
TILT PLATE
GROUND STRAP
3X WASHER
Electric Inboard Steering Actuator
LIP #1
LIP #2
DASH
3X LOCK NUT
SEALING PLUG
MUST BE INSTALLED
IN UNUSED PORT
ELECRTONIC HELM
EN
Advertisement
