Related Manuals for Victorian Plumbing bower
Summary of Contents for Victorian Plumbing bower
- Page 1 Belfast Sink Fitting Instructions Please follow them carefully and leave this manual with end user V3.01.24...
- Page 2 Before you begin: We recommend that this product is installed by a qualified tradesperson, Victorian Plumbing Ltd. accept no liability for products incorrectly installed or any damage to the floor, walls, plumbing, vanity cabinet, sink, counter top, or personal injury during installation.
- Page 3 Installation Step 1: Template & Preparation • Place the basin in the desired location on the work surface and using a pencil, mark around the outer edge of the basin and waste hole. • Cut out the work surface along the pencil lines using an appropriate saw/ jigsaw.
- Page 4 Step 3: Sink Installation • Carefully apply a bead of good quality silicone sealant along the edge of the cut work surface. • Place the basin into position and press down gently to ensure a secure fit. • Finally, pipe a fine bead around the outer edge of the sink edge using a good quality silicone sealant in either a colour match or clear finish.
Need help?
Do you have a question about the bower and is the answer not in the manual?
Questions and answers