Genmega ATM Owner Quick Reference Manual page 6

ATM Quick Reference Guide
If you make a mistake when selecting the software type from the Boot Menu, within a few hours you
have the option to go back to the Boot Menu and choose again.
To reset the Boot Menu you'll need to navigate to this 'hidden' menu.
Enter the Operator Menu with the Master Password (default = 555555) if you've changed it already,
then use that password.
Go to ATM OP Menu à Customer Setup Menu à Press the button in the bottom right corner of the
screen (blank menu item). This gives access to the 'Clear NVRAM Menu below'.
If you see the button above 'Factory Reset' then you can still return to the Boot Menu and make a
different selection – if you do not see the Factory Reset button, that means it's been too long and
you'll have to update the software manually to change versions.
The option to reset usually lasts about 12 hours and after that the extra files will be deleted from the
mainboard to save memory.
QR-Guide 6 © Genmega 2024