Power Requirements - Genmega ATM Owner Quick Reference Manual

ATM Quick Reference Guide
Welcome to your Genmega ATM
The purpose of this guide is to cover out of the box setup along with basic ATM operation and cash
loading procedures on your Genmega ATM.
There is also a detailed ATM Software Manual available which will outline all menu functions and
options. Use this link to download:
Genmega ATM Software Manual
http://ftp.genmega.com/Manuals/GenmegaAPManual.pdf

Power Requirements

All Models of Genmega ATMs require a standard 120VAC grounded wall outlet for power. These
machines are meant to be plugged into the wall and do not require 'hard wiring' or special electrical
service. Power consumption is 25 watts at idle – and 145~155 watts when printing or dispensing
cash.
If you are plugging the ATM into a circuit that is overloaded, or is shared with heaters, coolers or large
motors – consider installing a Battery Backup or UPS between the ATM and the wall. This will keep
voltage to the ATM constant and avoid problems resulting from low power.
For more information regarding ATM power consumption – including how to calculate how much it will
cost to power your ATM, please see our YouTube channel:
Genmega ATM Power Requirements and Consumption
https://youtu.be/nl4ytNojc0I?si=imw_msVDaHV3SrD2
For more information regarding proper grounding of the ATM and it's electrical connections:
Genmega ATM Electrical Series - Grounding
https://youtu.be/id7RAZKcSVo?si=bnAKB8-daIr6lmP0
Temperature and Weather
The manufacturers recommended temperatures are as follows:
During operation is 40F ~ 95F (5C ~35C)
While in storage is 32F ~ 123F (0C ~ 49C)
Humidity is 15% < RH < 85% non-condensing
WARNING - Lobby and wall-mount ATMs are not weatherized and should only be used indoors or
completely protected by an enclosure. Through-the-wall models are weatherized, however they
should be protected from direct rainfall or water using an awning or enclosure. Do not allow rain or
liquid to contact the ATM. Freezing temperatures will effect operation of the ATM, so heaters should
be used to maintain the internal temperature above freezing.
QR-Guide 2 © Genmega 2024