Genmega ATM Owner Quick Reference Manual page 4

ATM Quick Reference Guide
Opening the Vault Lock
The following instructions explain how to open the Standard S&G
Electronic lock on your ATM vault. If your ATM was shipped with an
optional or different lock, you'll need to use the supplemental
instructions for that specific lock.
Power is supplied to the lock by a 9-volt Battery, which is installed
from the bottom of the lock.
If you have any problems with a lock opening, always try a fresh
name brand (Duracell or Energizer) battery.
To Unlock using the Default Combination:
Press the default combination (1-2-3-4-5-6-#) one button at a time. A beep is heard following each
key press. You must press the '#' sign after entering the combination.
If the combination is entered correctly and you press # a double-beep is heard and the internal lock
solenoid will click indicating that the lock is open. Turn the T-Handle to open the door.
If the wrong combination is entered a triple-beep will be heard. If the correct combination is not
entered within 2 consecutive attempts a 10 minute delay or "lock out" will begin.
During this time, the led at the 10 o'clock position on the face of the lock will flash at 10 second
intervals. In addition any key press will respond with a triple-beep. Any attempt to use the lock while it
is in this mode will cause the 10 minute timer to reset.
To Change the Combination:
With the vault door open – to change the combination off of the default – press the following:
2 2 * (existing combination) # - (new combination) # - (new combination) #
Example:
2 2 * (star symbol) – 1 2 3 4 5 6 # - 6 5 4 3 2 1 # - 6 5 4 3 2 1 #
This would change the default combination of 123456 to a new combination of 654321.
WARNING: While orienting yourself with the electronic lock, making changes to the lock or
programming (including changing the combination) ALWAYS work with the vault door open. Do not
close the vault until the lock has been thoroughly tested.
Genmega does NOT program or provide a 'Master' or 'Factory Reset' Combination – if for some
reason you forget the combination, you'll need to call a locksmith to open the safe.
Genmega ATM - How to Change the Lock Battery
https://youtu.be/ifZPejLUUyo?si=wTtIvY4gs5Hg8GwG
QR-Guide 4 © Genmega 2024