Macintosh Os; Before You Begin; Installing The Print Driver - Xerox Phaser 790DP Getting Started Manual

Macintosh OS print drivers

Macintosh OS

Before you begin

1. Ensure the printer has been prepared for network printing.
2. Ensure you have the printer name, Apple Talk Zone (if applicable), and
IP Address. These may be obtained from your system administrator or
from the Configuration Page.
In order to print the Configuration Page, perform the following steps:
a.
b.
c.
d.
Installing the print drivers
1. Perform one of the following steps:
2. Double-click the AdobePS 8.6 Installer icon.
3. When the Warning dialog box is displayed, select Yes.
4. Select Restart when the installation is complete.
Xerox Phaser 790 Getting Started
Press the Offline button on the Printer Control Panel
Press the Menu button until the message Print Pages from List is
displayed on the Printer Control Panel.
Pressthe Item/Enter button in order to select Print Configuration
Page.
Pressthe Item/Enter again button in order to print the page.
Insert the User Software CD in your CD-ROM drive and open the
English: Printer Driver folder.
In order to install from files you downloaded using the Installer
WebTool, open the Printer Driver folder on your hard disk.
3. Network Setup
3-11