Xerox Phaser 790DP Getting Started Manual page 52

1. Setting up the Phaser 790
3. Pinch the Horizontal and Vertical Paper Guides and move them away
from the center of the tray as far as they will go.
4. Place the right edge of the paper stack against the right metal edge and
under the front right-hand side paper tab as shown below.
5. Ensure that the paper stack does not cover the MAX guideline.
6. Adjust the two Paper Guides so that they lightly touch the edges of the
paper stack.
1-42
0301101a
Loading paper in the paper tray
0 301067B-WOL
0 301068B-WOL
Xerox Phaser 790 Getting Started
301102a