Make sure to leave a space of at least 300 mm. A clearance of at least 300 mm must be Ieft around the
battery pack for proper cooling.
Note: Make sure that the battery pack is always exposed to the ambient air. The battery pack is cooled
by natural convection. If the battery pack is entirely or partially covered or shielded, it may cause the
battery pack to stop operating.
7.4 Tools
The following tools will be required to install PS2900H-M and PS2900H-S.
Screw Driver
Safety Gloves
Electric Drill
7.5 Installation Steps PS2900H-S
Step 1: Install a PS2900H-S with four footstand (Item E) and place it on the ground and adjust it to the
level. After installing the footstand, use a track level bar to confirm the level. Insert the waterproof cover
(Item K) into the bottom of the battery and lock it in place with the clip.
Crimping Modular
Safety Goggles
Track Level Bar
8
Safety Shoes
Plier
Tape
Multimeter
Ribbon
Marker