Mesh Intercom On And Off; Mesh Intercom Reconnection - Sena +MESH Quick Start Manual

MESH INTERCOM

3.3.2 Mesh Intercom On and Off

1. To start the Mesh Intercom, tap the Multi-function
Button. The LED flashes green and you will hear "Mesh
intercom on, Open Mesh, channel 1" from the
connected corresponding headset.
2. To terminate the Mesh Intercom, tap the Multi-function
Button. You will hear "Mesh Intercom Off" from the
connected corresponding headset.
Note:
1. The +Mesh supports only one headset or helmet for
pairing.
2. If the connected headset or helmet has HD Intercom
activated, the headset supports communication with
HD quality sound.
3. If Audio Multitasking is enabled, the headset or
helmet communicates in Normal Intercom mode.
4. If a headset or helmet that is connected to a +Mesh
connects to another headset or helmet using
Bluetooth intercom, the voice prompts from the
+Mesh will be heard by all of the connected headsets.
5. If the headset or helmet has Audio Multitasking
enabled or HD Intercom disabled, the intercom
quality of Mesh Intercom will be reduced.
6. You can also start and terminate the Mesh Intercom
by using the headset or helmet, but "Mesh Intercom
On" and "Mesh Intercom Off" voice prompts will not
be heard.

3.3.3 Mesh Intercom Reconnection

If Bluetooth connection between the +Mesh and a headset
is disconnected, tap the Multi-function Button to reconnect
the two devices.
12