Brady M210 User Manual page 903

Problem
Menu does not display all label
types.
Cannot change to a different
language.
Datamatrix and/or QR code can't
be entered.
Text on pre-sized labels is not
positioned correctly.
M210/M210-LAB User Manual
Cause
The M210/M210-LAB only
displays the label types that will
work with the installed label
material (cartridge). Fewer label
types are supported when using
pre-sized cartridges.
Pressed a wrong key while in
language setup.
Label type is set to Banner
Portrait.
Sensor is blocked by debris.
Corrective Action
Insert the proper label material
(cartridge) for the labels you want to
produce.
Examples:
• If using Nylon, Vinyl or Polyester
continuous labels, all labels types will
be shown.
• If using Self-Lam labels the only label
types displayed are Banner
Landscape, Fixed Length and Wire.
• If using Permasleeve labels, the only
label types that will be shown are
Banner Landscape and Fixed Length.
• Only .75-inch media will work with 2D
barcodes.
Reset the language. See
information on setting a specific
language.
Set label type to Banner Landscape.
Remove the cartridge and blow debris
off of the sensor using a can of
compressed air or a lint-free swab.
See page 75.
page 22 for
74