Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Garmin ATEMOS 100 WITH K5
Summary of Contents for Garmin ATEMOS 100 WITH K5
- Page 1 ATEMOS 100 WITH K5 ® Owner’s Manual...
- Page 2 © 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
- Page 3 Table of Contents Waypoints, Routes, and Tracks........7 Waypoints ................... 7 Marking Your Current Location ..........7 Getting Started............... 1 Marking a Waypoint Using the Map ........7 Setting Up the Atemos 100 System ..........1 Editing a Waypoint ..............7 Device Overviews ...............
- Page 4 Customizing Your Device..........11 Customizing the Main Menu ............. 11 Customizing the Data Fields ............. 11 Enabling the Map Data Fields ..........11 System Settings ................ 11 Dog Settings ................11 Contact Settings ............... 11 Display Settings ................ 11 Calibrating the Touchscreen ..........11 Appearance Settings ..............
-
Page 5: Getting Started
(Turning On the Devices, page today. If necessary, add the dog collar device to the handheld • Go to garmin.com/express. device (Adding a Dog to the Atemos 100 Handheld Using • Keep the original sales receipt, or a photocopy, in a safe Wireless Pairing, page place. -
Page 6: Acquiring Satellite Signals
Acquiring Satellite Signals Both the collar and handheld device must acquire satellite signals before you put the collar on your dog. Acquiring satellites can take a few minutes. Go outdoors to an open area. Turn on both devices (Turning On the Devices, page Select the power key on the handheld device. -
Page 7: Vhf Radio Information
Select Setup > Dogs > Dog Track On Map. device with a third party antenna or an antenna not approved by Select an option to show more or less of the tracks on the Garmin ® . Go to www.garmin.com/tracking-legal for details about map. -
Page 8: Communication With The Collar
Fitting the Collar on Your Dog Tracking Your Dog on the Map Before you can track a dog on the map, you must add it to the CAUTION handheld device (Adding a Dog to the Atemos 100 Handheld Do not spray the device or collar with harsh chemicals including Using Wireless Pairing, page but not limited to flea or tick spray. -
Page 9: Location Alerts
Before you can track your dogs and contacts using BaseCamp, • Select Delete to remove the alert. you must download BaseCamp to your computer (www.garmin.com/basecamp). Dog Training The BaseStation feature of BaseCamp allows you to track your dogs and contacts in real-time on a computer. For more... -
Page 10: Contact Tracking
Customizing the Training Keys Initiating an Emergency Alert Before you can initiate an emergency alert, you must turn on the NOTE: Training features are not available in all areas for transmitter (Turning On the Transmitter, page 14). tracking collars. Before someone can receive your emergency alert, someone Before you can assign the training keys to a dog, you must add must add you as a contact (Adding a Contact Using MURS/VHF,... -
Page 11: Waypoints, Routes, And Tracks
• Mark your truck's location (Marking Your Current Location, Select the information bar along the top of the screen. page Select > OK. • Track your dogs (Tracking Your Dog on the Map, page Editing a Waypoint • Track your fellow hunters (Tracking a Contact, page Before you can edit a waypoint, you must create a waypoint. -
Page 12: Recording Track Logs
Creating a Route If you select Record, Show On Map, a line on the map indicates your track. Select > Route Planner > Create Route > Select First Point. Select Record Method. Select a category. Select an option: Select the first point on the route. •... -
Page 13: Elevation Plot
Select OK. Turn until points toward the top of the compass, and continue moving in that direction to the destination. Clearing the Current Track Course Pointer Select > Track Manager > Current Track > Clear Current Track. The course pointer is most useful if you are navigating on water or where there are no major obstacles in your path. - Page 14 Select Use. The VIRB remote function allows you to control your VIRB action camera using your device. Go to www.garmin.com/VIRB Enter a radius. to purchase a VIRB action camera. When you enter an area with a proximity alarm, the device sounds a tone.
-
Page 15: Customizing Your Device
You can customize tones for messages, keys, warnings, and Overlay Service), or Demo Mode (GPS off). For more alarms. information about WAAS, go to http://www.garmin.com /aboutGPS/waas.html. Select Setup > Tones. BaseCamp BaseStation: Sets how the device connects to Select a tone for each audible type. -
Page 16: Routing Settings
Automotive Mode shows an automotive perspective with the Time Settings direction of travel at the top. Select Setup > Time. Guidance Text: Sets when the guidance text on the map is Time Format: Sets the device to show time in a 12-hour or 24- shown. -
Page 17: Viewing Device Information
Rechargeable, replaceable lithium-ion • You can update software and maps for your handheld device Battery life Up to 20 hr. and mini dog collar device using Garmin Express ™ Operating temperature From -4° to 140°F (from -20° to 60°C) • You can update software for your dog collar device using range Garmin WebUpdater. -
Page 18: Saving Energy While Charging The Device
Changing the Dog Collar Device Update Rate Before you can change the collar update rate, the collar must be • GPI custom POI files from the Garmin POI Loader. Go to turned on and within range of the handheld device. -
Page 19: Accessories And Replacement Parts
Select Device > Receive from Device. accessories. Select the dog collar device from the list, and click OK. • Bring the Garmin device within range 3 m (10 ft.) of the ANT+ BaseCamp creates a folder of transferred data in My accessory. -
Page 20: Replacing The Collar Strap
K5 Battery Replacement Instructions K5 Components Replace the battery cover. Replace the screws to secure the battery cover. Connect the battery connector and power connector. You may need to use a flat screwdriver to help secure the connectors. Select the power key to test the connections. When properly connected, a tone is emitted and the status LED blinks green. -
Page 21: Data Field Options
Ascent - Total: The total elevation distance ascended since the last reset. Barometer: The calibrated current pressure. Battery Level: The remaining battery power. Bearing: The direction from your current location to a destination. You must be navigating for this data to appear. Cadence: The number of revolutions of the crank arm or number of strides per minute. - Page 22 Speed - Overall Avg.: The average speed while moving and stopped since the last reset. Sunrise: The time of sunrise based on your GPS position. Sunset: The time of sunset based on your GPS position. Time of Day: The current time of day based on your current location and time settings (format, time zone, daylight saving time).
- Page 23 Go 9 almanac 10 software files, transferring 14 altimeter 12 updates 13 fuse, changing 17 calibrating 9 updating 13 ANT+ sensors 15 specifications 13 pairing 15 stopwatch 10 Garmin Express 13 area calculation 10 sunrise and sunset times 10 registering the device 13 updating software 13 geofences 5 backlight 11, 14 tempe 15 GPS 10 BaseCamp 5, 11, 14, 15 temperature 15 settings 11 battery 13, 16...
- Page 24 June 2020 GUID-1793CFF9-8186-42FC-8F34-375F89528386 v2...
Need help?
Do you have a question about the ATEMOS 100 WITH K5 and is the answer not in the manual?
Questions and answers