Page 3
Table of Contents Tracks ..................6 Recording Track Logs ............6 Viewing the Elevation Plot of a Track ........6 Introduction..............1 Viewing Details about the Track ..........6 Setting Up the System ..............1 Saving the Current Track ............6 Device Overviews ...............
Device Information............11 Viewing Device Information ............11 Support and Updates ..............11 Support and Updates ............11 Updating the Software ............11 Device Care ................11 Cleaning the Device ............. 11 Cleaning the Screen ............11 Atemos 50 Handheld Device Specifications ......12 K5 Dog Collar Device Specifications ........
Page 5
Introduction Select to zoom in on the map. Select to zoom out on the map. WARNING Select to view the map. See the Important Safety and Product Information guide in the MENU Select to open the menu for the active page. product box for product warnings and other important Select twice to open the main menu.
Page 6
NOTE: Your dog collar device may look different than the device or tick spray that is applied to the dog is completely dry before pictured. placing the collar on the dog. Small amounts of harsh chemicals can damage the plastic components and collar laminate. You should fully charge the battery before you use the device for the first time.
Page 7
Dog Status Icons Treed: The number of times and locations where the dog treed during the hunt. Sitting Resetting a Dog's Statistics and Track Running You might want to clear the dog statistics and track before a On point new hunt. Treed Select Dog List.
Page 8
4) and tell them you must download BaseCamp to your computer to you. (www.garmin.com/basecamp). You can use track and control codes to authorize a handheld The BaseStation feature of BaseCamp allows you to track your device to interact with your dog collar device. If you are not near dogs and contacts in real-time on a computer.
Page 9
Enter the name of the contact, and select Done > OK. Select a waypoint. The contact is added to your handheld device. Select MENU > Move Waypoint. Select a location on the map. Tracking a Contact Select ENTER. You can keep track of contacts' locations using the map. Repositioning a Waypoint to Your Current Location Select MAP.
Page 10
Navigate using the compass (Navigating with the Bearing Select Elevation Plot. Pointer, page 7) or map (Map, page Viewing Details about the Track Editing a Route Select Tools > Track Manager. Select Tools > Route Planner. Select a track. Select a route. Select View Map.
Page 11
Enabling the Map Data Fields Select a waypoint. Select MAP > MENU > Setup Map > Data Fields. Select MENU > Find Near Here. Select an option. Select a category. The list includes waypoints near the original waypoint. Compass The handheld device has a 3-axis, tilt-compensated compass. Navigating with Sight 'N Go You can use a bearing pointer or a course pointer to navigate to You can point the device at an object in the distance, lock in the...
Page 12
If necessary, select to view a different day. chirp ™ A chirp is a small Garmin accessory that is programmed and ® Setting an Alarm left in a geocache. You can use your device to find a chirp in a Select Tools >...
Page 13
The VIRB remote function allows you to control your VIRB Select Setup > System. action camera using your device. Go to www.garmin.com/VIRB GPS: Sets the GPS to Normal, WAAS/EGNOS (Wide Area to purchase a VIRB action camera. Augmentation System/European Geostationary Navigation Overlay Service), or Demo Mode (GPS off).
Page 14
Dog Alerts: Sets how you are alerted to certain actions (Setting Select Setup > Units. Dog Alerts, page Select a measurement type. Select a unit of measure for the setting. Display Settings Select Setup > Display. Time Settings Backlight Timeout: Adjusts the length of time before the Select Setup >...
You can view the unit ID, software version, and license agreement. Select Setup > About. Support and Updates • You can update software and maps for your handheld device and mini dog collar device using Garmin Express ™ Device Information...
• JPEG photo files. protocols -0.72 dBm • GPX files. K5 Dog Collar Device Specifications • GPI custom POI files from the Garmin POI Loader. Go to www.garmin.com/products/poiloader. Battery type Internal rechargeable lithium-ion battery Installing a Memory Card Battery life From 20 to 40 hr.
10 m (32.9 ft.) away from other ANT+ Collection. accessories. Deleting Files • Bring the Garmin device within range 3 m (10 ft.) of the ANT+ accessory. NOTICE • After you pair the first time, your Garmin device automatically If you do not know the purpose of a file, do not delete it.
NOTE: You should leave the two inner screws in place. device with a third party antenna or an antenna not approved by Pry off the back plate. Garmin. Go to www.garmin.com/tracking-legal for details about Disconnect the battery connector and power connector.
Before you replace the VHF antenna, you must remove all dirt, Data Fields water, and debris from the device. Also, you need a small Accuracy of GPS: The margin of error for your exact location. Phillips screwdriver. For example, your GPS location is accurate to within +/- 12 ft. Remove the 4 screws from the cover over the VHF (3.65 m).
Speed - Moving Avg.: The average speed while moving since • Go to garmin.com/express the last reset. • Keep the original sales receipt, or a photocopy, in a safe Speed - Overall Avg.: The average speed while moving and place.