Precautions For Moving The Printer; Moving The Printer Within The Office; Preparing The Printer For Shipment - Xerox Phaser 3500 User Manual

Precautions for Moving the Printer

Caution
Remove the print cartridge prior to moving the printer. Failure to do so can result in
damage to the printer.
Use one or two people to lift the printer.
Always turn off the printer using the
power switch, and unplug all cables and
cords.
Disconnect and remove the optional
500-Sheet Feeder if present.
Always lift the printer from the
designated lift points.
Do not place any food or liquids on the
printer.
Damage to the printer caused from
improper moving or failure to repackage
the printer properly for shipment, is not
covered by the warranty, service
agreement, or Total Satisfaction
Guarantee. The Total Satisfaction
Guarantee is available in the United
States and Canada. Coverage may vary
outside these areas; please contact your
local representative for details.

Moving the Printer Within the Office

The printer can be safely moved from one location within an office to another as long as it
travels in an upright position, gently. Any jarring movement, such as pushing the printer over a
raised door threshold or across a parking lot, can damage the printer.
Caution
Remove the print cartridge prior to moving the printer. Failure to do so can result in
damage to the printer.

Preparing the Printer for Shipment

To transport the printer by vehicle, a printer must be repackaged in the original packaging or a
repackaging kit. Instructions for repackaging the printer are provided in the repackaging kit.
If you do not have the original packaging, or are unable to repackage the printer, contact your
local Xerox service representative.
Phaser® 3500 Laser Printer
42
Moving and Repacking the Printer