Led Descriptions; Errors And Warnings; Moving And Repacking The Printer - Xerox Phaser 3500 User Manual

Some of the LED descriptions and error messages that appear in the control panel are listed
below.

LED Descriptions

The LED indicates the different functioning states of the printer:
LED Behavior
Blinking Green
Steady Green
Steady Orange
Blinking Orange
LED is off

Errors and Warnings

The printer displays error or warning messages on the control panel display.
Hardware or software failures that may require service support are presented as errors. When
the printer's control panel displays an error message, the LED blinks or turns orange. An error
message replaces the status lines.
When an error occurs during printing, the Status Monitor balloon, available only with
Windows on a network-enabled or a USB cable-connected printer, appears on your computer
screen alerting you that the printer needs attention.

Moving and Repacking the Printer

Warning
Follow these guidelines to avoid injuring yourself or damaging the printer.
For safety information, go to Appendix "A–User Safety" in this guide.
Follow these guidelines to move the printer within the office or to prepare the printer for
shipment.
Description
Warming up
Displaying menus
Canceling a job
Waiting for more data
Processing data
Printing pages
Ready to print
A major error has occurred and printing has
stopped
A minor error exists that prevents further printing
without user attention
Power is off
Power Saver mode
Phaser® 3500 Laser Printer
41
Moving and Repacking the Printer