Parameters - Kemper KHS CoolFlow Operating Instructions Manual

7
Parameter
Parameter
Timestamp
Cooling Buffer Temp (S1)
PWC Direct Flow Temp (S2)
PWC Return Flow Temp (S3)
S4
PWC Return Flow Rqr Temp
PWC Direct Flow Rqr Temp
Cooling Buffer Pump (R1)
Cooling Circulation Pump (R2)
R3
R4
Cooling Buffer Pump Speed, % (V1)
PWC Circulation Pump Speed, % (V2)
Buffer Request
All temperature values in °C
Description
Date and time the parameter values were stored
Average operating temperature in buffer (actual value)
Cold water cooler PWC-C inlet temperature
(actual value)
Cold water cooler PWC-C outlet temperature
(actual value)
Unallocated sensor input
Preset cold water cooler-PWC-C inlet temperature
(target value)
Preset cold water cooler-PWC-C outlet temperature
(target value)
Status of process-medium pump (off/on)
Status of circulation pump (off/on)
Status of 230V output relay at plug contact 1 (closed/open)
Status of potential-free switching contact relay
between plug contacts 2 and 3 (closed/open)
Default speed of process-medium pump (percent)
Default speed of drinking water circulation pump
(percent)
Count of the process-medium buffer tank
reloading requests
© www.kemper-group.com – 01.2024 / K410061100000-00 – 25 /64