Ethernet Connection - Kemper KHS CoolFlow Operating Instructions Manual

EN EN
5.4
Connect the data logger to your network using
an Ethernet cable. If DHCP is deactivated in the
network, an IP address must be assigned manually.
Note! No network connection is
necessary if the device is used exclusi
vely as a data logger.
22 /64 – K410061100000-00 – / 01.2024– © www.kemper-group.com

Ethernet connection

Network
Ethernet cable
You can find the data point list at:
www.kemper-group.com/qr00029
Data logger