Safety Instructions - Kemper KHS CoolFlow Operating Instructions Manual

Safety instructions to be observed during
assembly and electrical installation

Safety instructions

Be sure to read and follow the safety instructions
in the manual. Failure to follow the safety inst-
ructions can result in injury or even death and in
damage to property.
Labelling of important warning information:
Danger! Electricity!
Indicates hazards that may result in
severe or fatal injury.
Note!
Indicates hazards that may result in
system damage or malfunctions.
Info
Indicates additional information and
tips.
Danger! Have work carried out
only by plumbingspecialists who have
received training in electrical
installation work.
Warning! Priority must be given to the national
standards and provisions governing accident
prevention.
Use the device
- only in perfect condition
- as intended.
Danger! Electricity!
Danger of fatal electric shock!
- Disconnect the system from the
Note!
Warranty is voided if the data logger
and gateway are connected to an
unsuitable power supply or the housing
is opened. There are no operating
elements inside the housing.
Note!
Only install the data logger in dry
areas and under ambient conditions as
described under section 1, Technical Data.
Note!
Only remove the SD card when the
device is switched off. Removing the
SD card during a read or write
operation can cause irreparable
damage to the SD card.
© www.kemper-group.com – 01.2024 / K410061100000-00 – 15 /64
power supply before carrying
out work.