Gebr. Kemper Gmbh + Co. Kg; Harkortstraße 5; 57462 Olpe; Web: Www.kemper-Group.com - Kemper KHS CoolFlow Operating Instructions Manual

EN EN
Table of contents
Safety instructions
1 Technical data
2 Scope of delivery
3 Disposal and contaminants
4 Assembly
4.1 Display and connections
4.2 Installation
4.3 Status LED
5 Operation
5.1 Reset button
5.2 MicroSD card
5.3 Firmware update
5.3.1 Firmware update data logger
5.3.2 Cold water cooler Ctrl. FW update
5.4 Ethernet connection
5.5 Netzwork settings
6 Preparation for logfile read-out
7 Parameters
Manufacturer's address

Gebr. Kemper GmbH + Co. KG

Harkortstraße 5

57462 Olpe

Tel.: +49 2761 891-0

Web: www.kemper-group.com

After-sales service
Service hotline
Tel.: +49 2761 891 800
Mail: anwendungstechnik@kemper-group.com
About this manual
Read this manual carefully before starting installa-
tion or use, and follow the instructions! Keep the
manual in a safe place for future reference!
14 /64 - K410061100000-00 - / 01.2024- © www.kemper-group.com
About this manual
15
16
17
17
18
18
18
20
20
20
20
21
21
21
22
23
24
24
Liability
The manufacturer assumes no warranty or liability
in the event of:
- Failure to observe the instructions in this manual.
- Incorrect installation and/or operation.
- Unauthorised modification of the product.
- Other improper methods of operation.
Intended use
The data logger is used to record measured values
from the KHS CoolFlow cold water cooler. The data
is stored on an SD card. The gateway provides ac-
cess to the data points via Modbus TCP/IP. Any other
use is considered contrary to the intended use.
Misuse
Only use the data logger in conjunction with our
KHS CoolFlow cold water cooler and only within the
application limits specified in the technical data.