Table of Contents
Advertisement
* These settings
return to tile default
5 minutes
or more after tile power source
is
disconnected
or battery
is removed.
As far as the other items without
an asterisk
are
concerned,
their settings
are retained
even when the power source
is disconnected
or
battery
is removed,
as long as the vanadium
lithium
battery
is charged.
When recording a close subject
When REC LAMP is set to ON, tile red camera recording lamp on tile fl'ont of tile camcorder
may reflect on the
subject
if it is close. In this case, we recommend you set REC LAMP to
OFF.
Notes
• When playing
back a tape recorded
in tile 16-bit mode, you cannot adjust tile balance
in
AUDIO
MIX.
• If you select 16BIT in AUDIO
MODE, you cannot add an audio sound.
• If you select BRIGHT in LCD B.L., tile battery
lid while recording
decreases
10 to 20%.
When you use a power
source other than the battery,
tile menu item LCD B.L. is set to
BRIGHT automatically
and the item does not appear on tile screen.
32
Advertisement
Table of Contents
