Name Of Each Component; Head - Panasonic VL-W1-N Series Setup And Maintenance Manual

1-6 Name of Each Component

1-6-1 Head

8 9
10 11
1. Laser radiation indicator
The display that shows the status of laser radiation and the laser welding machine.
Status
Being in laser emitting
Being in laser pumped state and internal shutter opened
Being in laser pumped state and internal shutter closed
Laser pumping is in progress (uncompleted) and internal shutter opened
Laser pumping is in progress (uncompleted) and internal shutter closed
Laser in non-pumped state
WARNING
2. Laser emission port
The emission port of the laser for processing and the guide laser.
3. Protection glass of laser emission port
This glass protects laser emission port from dirt or damage.
Attach this glass always.
4. Laser pointer emission port
From this port the red laser pointer radiates in oblique direction when indicating the work distance by the guide laser.
Refer to "2-3-5 Lasing position check" (P.46).
When using the work distance indication by the guide laser, do not seal the laser pointer emission port at the
installation.
6 5 7
• If the laser emission indicator is placed out of the sight of operators, place the
external indicator light or warning lamp on the immediately apparent place on the
system.
ME-VLW1N-SM-1
1
4
2, 3
Indication
Orange lighted-up
Green lighted-up
White lighted-up
Green flashing
White flashing
Lights off
31