decina AURORA AU1500MW Installation & Owners Manual

Back-to-wall freestanding bath

Advertisement

Quick Links

A U R O R A B A C K - T O - W A L L F R E E S T A N D I N G B A T H
This manual provides the correct steps and care advice for a safe and long lasting installation.
Manufactured from premium sanitary grade acrylic, the Aurora's matte white finish offers designer style without the
expense of a solid surface bath. Its back-to-wall design allows the bath to sit flush up against a bathroom wall with no
integration required. Comes with adjustable self-supporting feet for easy installation.
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESMAN
READ CAREFULLY
PRIOR TO COMMENCING
INSTALLATION
1 | DECINA INSTALLATION MANUAL
I N S T A L L A T I O N & O W N E R G U I D E
Thank you for purchasing a Decina Aurora Freestanding Bath.
AU1500MW 1500(L) x 800(W) x 600(H) mm
AU1700MW 1700(L) x 800(W) x 600(H) mm

PRE-INSTALLATION CHECKS

Unpack & check the item is correct & no damage has occurred during transit.
!
If there are any visible defects DO NOT PROCEED WITH THE INSTALLATION &
!
please contact the place of purchase immediately. ANY CLAIMS FOR DAMAGE
WILL NOT BE ACCEPTED AFTER INSTALLATION.
Protect your bath before & during installation, scratches &/or cracks &/or surface
!
damage sustained during or after the installation are not covered by warranty.
Installation must be in accordance with building regulations & local authority
!
requirements.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AURORA AU1500MW and is the answer not in the manual?

Questions and answers

Summary of Contents for decina AURORA AU1500MW

  • Page 1 I N S T A L L A T I O N & O W N E R G U I D E Thank you for purchasing a Decina Aurora Freestanding Bath. This manual provides the correct steps and care advice for a safe and long lasting installation.
  • Page 2 Ensure the bath is level so all water can drain to the waste outlet. Finished wall/tiled surface STEP 3. Mark the floor and outline of Mark the desired position of the bath the bath on the floor and the outline on the wall. 2 | DECINA INSTALLATION MANUAL...
  • Page 3 INSTALLATION STEPS STEP 4. Carefully tilt the bath on its side and connect it to the drain outlet. We recommend using a Decina Flexible Connector. Waste Flexible Connector Ensure the Flexible Connector is cut to the correct length for easier installation and to prevent drainage issues.
  • Page 4 *Warranty T&Cs apply. All dimensions are nominal & subject to manufacturing tolerances & may vary +/-5mm therefore we strongly recommend installation does not occur until after delivery. Decina reserves the right to modify or change models without notice. Please confirm all particulars with your sales consultant prior to purchase. For further information and for warranty T&C’s, please visit decina.com.au...

This manual is also suitable for:

Aurora au1700mw

Table of Contents