decina ARIA AR1500W Installation & Owners Manual

Back-to-wall freestanding bath

Advertisement

Quick Links

A R I A B A C K - T O - W A L L F R E E S T A N D I N G B A T H
This manual provides the correct steps and care advice for a safe and long lasting installation.
Manufactured from premium sanitary grade acrylic, the Aria freestanding back-to-wall bath is easy to install
with adjustable self-supporting feet. The unique Decina tile bead design allows it to be built into a tiled wall
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESMAN
READ CAREFULLY
PRIOR TO COMMENCING
INSTALLATION
1 | DECINA INSTALLATION MANUAL
I N S T A L L A T I O N & O W N E R G U I D E
Thank you for purchasing a Decina Aria Freestanding Bath.
to save bathroom space and makes cleaning easier.
AR1500W 1500(L) x 800(W) x 610(H) mm
AU1700WM 1700(L) x 800(W) x 600(H) mm

PRE-INSTALLATION CHECKS

Unpack & check the item is correct & no damage has occurred during transit.
!
If there are any visible defects DO NOT PROCEED WITH THE INSTALLATION &
!
please contact the place of purchase immediately. ANY CLAIMS FOR DAMAGE
WILL NOT BE ACCEPTED AFTER INSTALLATION.
Protect your bath before & during installation, scratches &/or cracks &/or surface
!
damage sustained during or after the installation are not covered by warranty.
Installation must be in accordance with building regulations & local authority
!
requirements.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ARIA AR1500W and is the answer not in the manual?

Questions and answers

Summary of Contents for decina ARIA AR1500W

  • Page 1 Manufactured from premium sanitary grade acrylic, the Aria freestanding back-to-wall bath is easy to install with adjustable self-supporting feet. The unique Decina tile bead design allows it to be built into a tiled wall to save bathroom space and makes cleaning easier.
  • Page 2 Brick or timber stud wall a waterproof wall lining or villaboard to provide a wall cavity 10-15mm deep to accommodate the Villaboard tile bead. Finish flooring. Waterproof membrane Mark the floor and outline of the bath 2 | DECINA INSTALLATION MANUAL...
  • Page 3 INSTALLATION STEPS STEP 4. Carefully tilt the bath on its side and connect it to the drain outlet. We recommend using a Decina Flexible Connector. Waste Flexible Connector Ensure the Flexible Connector is cut to the correct length for easier installation and to prevent drainage issues.
  • Page 4 *Warranty T&Cs apply. All dimensions are nominal & subject to manufacturing tolerances & may vary +/-5mm therefore we strongly recommend installation does not occur until after delivery. Decina reserves the right to modify or change models without notice. Please confirm all particulars with your sales consultant prior to purchase. For further information and for warranty T&C’s, please visit decina.com.au...

This manual is also suitable for:

Aria au1700wm

Table of Contents