Installation - Beko BMD 260 AF DB Manual

Installation

3
3.1 Installation
• Remove all packing material and ac-
cessories. Examine the oven for any
damage such as dents or broken door.
Do not install if oven is damaged.
• Remove any protective film found on
the microwave oven cabinet surface.
• Do not remove the light brown Mica
cover that is attached to the oven cav-
ity to protect the magnetron.
• Select a level surface that provide
enough open space for the intake and/
or outlet vents.
30 cm
20 cm
20 cm
20 cm
min.85 cm
• Minimum installation height is 85 cm.
• The rear surface of appliance shall be
placed against a wall. Leave a mini-
mum clearance of 30cm above the
oven, a minimum clearance of 20cm
is required between the oven and any
adjacent walls.
• Do not remove the legs from the bot-
tom of the oven.
• Blocking the intake and / or outlet
openings can damage the oven.
• Place the oven as far away from radios
and TV as possible. Operation of mi-
crowave oven may cause interference
to your radio or TV reception. 2. Plug
your oven into a standard household
outlet. Be sure the voltage and the fre-
quency is the same as the voltage and
the frequency on the rating label.
Microwave Oven / User Manual
WARNING: Do not
install oven over
a range cooktop
or other heat-pro-
ducing appliance.
A
If installed near or
over a heat source,
the oven could be
damaged and the
warranty would be
void.
The
surface may be
hot during opera-
tion.
accessible
15 / EN