Installation And Connection - Beko BMOB 20202 W User Manual

Your microwave oven
2
2.3 Turntable installation
• Never place the glass tray upside
down. The glass tray should never be
restricted.
• Both glass tray and turntable support
must always be used during cooking.
• All food and containers of food must
always place on the glass tray for co-
oking.
• If glass tray or turntable support crack
or break, contact your nearest authori-
zed service center.

Installation and connection

3
3.1 Installation and connection
• Remove all packing material and ac-
cessories. Examine the oven for any
damage such as dents or broken door.
Do not install if oven is damaged.
• Remove any protective film found on
the microwave oven cabinet surface.
• Do not remove the light brown Mica
cover that is attached to the oven ca-
vity to protect the magnetron.
• Please observe the special installation
instructions.
• The appliance can be installed in a 60
cm wide wall-mounted cabinet (at least
55 cm deep and 85 cm off the floor).
• The appliance is fitted with a plug and
must only be connected to a properly
installed grounded socket.
• The mains voltage must correspond
to the voltage specified on the rating
plate.
• If the plug is no longer accessible after
installation, an all-pole isolating switch
must be present on the installation side
with a contact gap of at least 3 mm.
• Adapters, multi-way sockets and ex-
Microwave Oven / User Manual
Göbek (alt kısım)
Hub (underside)
Glass tray
Cam tabla
Turntable shaft
Döner tabla mili
Turntable ring assembly
tension cords must not be used. Over-
loading can result with a risk of fire.
The
surface may be
hot during opera-
tion.
Do not trap or
B
bend the power
cable.
Döner tabla desteği
accessible
13 / EN