Installing The Turntable; Installation And Connection; Radio Interference - Beko MGC 20130 BB User Manual

Hide thumbs Also See for MGC 20130 BB:
Table of Contents

Advertisement

Available languages

Available languages

Your microwave oven
2

2.3 Installing the turntable

• Never place the glass tray upside
down. The glass tray should never be
restricted.
• Both glass tray and turntable support
must always be used during cooking.
• All food and containers of food must
always place on the glass tray for cook-
ing.
• If glass tray or turntable support crack
or break, contact your nearest author-
ized service center.

Installation and connection

3
3.1 Installation
1. Make sure that all the packing materi-
als are removed from the inside of the
door.
WARNING:
for any damage, such as mis-
aligned or bent door, dam-
aged door seals and sealing
A
surface, broken or loose door
hinges and latches and dents
inside the cavity or on the
door. If there is any damage,
do not operate the oven and
contact qualified service per-
sonnel.
2. This microwave oven must be placed
on a flat, stable surface to hold its
weight and the heaviest food likely to
be cooked in the oven.
3. Do not place the oven where heat,
moisture, or high humidity are gener-
ated, or near combustible materials.
4. For correct operation, the oven must
have sufficient airflow. Allow 20cm of
space above the oven, 10cm at back
Microwave Oven / User Manual
Check the oven
Hub (underside)
Glass tray
Turntable ring assembly
and 5cm at both sides. Do not cover or
block any openings on the appliance.
Do not remove feet.
5. Do not operate the oven without glass
tray, roller support, and shaft in their
proper positions.
6. Make sure that the power supply cord
is undamaged and does not run under
the oven or over any hot or sharp sur-
face.
7. The socket must be readily accessible
so that it can be easily unplugged in an
emergency.
8. Do not use the oven outdoors.

3.2 Radio interference

Operation of the microwave oven can
cause interference to your radio, TV, or
similar equipment.
When there is interference, it may be re-
duced or eliminated by taking the follow-
ing measures:
1. Clean door and sealing surface of the
oven.
13 / EN

Advertisement

Table of Contents
loading

Table of Contents