Cycplus T2 User Manual page 8

3 Inse the quick release skewer
into the axle of T2 and install the
nut in place, but don't tighten it
yet, in order to install the bike
frame.
6 Shake the bike frame after installation to make sure the frame is
secured to T2.
① Failure to properly secure the bike can result in serious prope y damage and personal inju .
② Never adjust the quick release skewer or thru axle while someone is sitting on the bike.
WARNING!
③ There're still a few bike frames incompatible with T2. Stop the installation immediately if any
abnormalities occur.
④ Please refer to the disclaimer and don't hesitate to contact us for any installation problems.
4 Adjust the shifter untill the chain
is on the smallest sprockets of
both chainwheel and cassette.
5 Secure the bike with the thru-axle
of your bike.
Original thru-axle
07