Power Connection; Working Status - Cycplus T2 User Manual

2.6 Power Connection

Please use the AC adapter only that comes
with T2 to power the device.
The AC cable can be replaced as you like.
AC cable

3 Working Status

1. Working modes
T2 has 2 working modes, unplugged mode and plug-in mode. Plug-in mode can
provide a better riding experience. The main functional di erences between the
two modes are as follows.
Signal connection
Downhill and ine ia
simulation
Climbing simulation
Notice: It is recommended for high-intensity riders to ride in plug-in mode for electricity to
dissipate heat for T2 after stop.
2. Indicators
Unplugged mode
When you sta riding, you need to pedal to
generate power for wireless connection.
After you stop, the LED indicator may go out,
but the stored power will be available for the
wireless signal to work for 5 more minutes.
Unable to simulate downhill and ywheel ine ia
When riding at low speed (<15KMH),
maximum gradient suppo ed <15%.
No e ect at high speed.
Shines steadily: ANT data broadcast working properly
Shines steadily: bluetooth connected
Flashes: bluetooth not connected
Shines steadily: Power supply works properly
AC adapter
10
Plug-in mode
Ready to connect
Bluetooth and ANT anytime
Able to simulate downhill and
ywheel ine ia
15%