Cycplus T2 User Manual page 10

4 Adjust the shifter untill the chain
is on the smallest sprockets of
both chainwheel and cassette.
7 Shake the bike frame after installation to make sure the frame is
secured to T2.
① Failure to properly secure the bike can result in serious prope y damage and personal inju .
② Never adjust the quick release skewer or thru axle while someone is sitting on the bike.
WARNING!
③ There're still a few bike frames incompatible with T2. Stop the installation immediately if any
abnormalities occur.
④ Please refer to the disclaimer and don't hesitate to contact us for any installation problems.
3 Inse the quick release skewer into
the axle of T2 and install the nut in
place, but don't tighten it yet, in order
to install the bike frame.
5 Align the bike chain with the
smallest sprocket of the cassette
on T2, and mount the frame to T2.
6 Adjust the lock nut of the quick
release skewer, and lift and press the
handle frequently at the same time
until the pressing resistance is
appropriate, then press the handle
to secure the skewer.
09