Sony DSC-RX100M7 Service Manual page 24

4-2-5. MS-1040 Board
Note 1
This screw cannot be reused. Discard the screw removed
once in servicing. Instead, use a new screw.
このねじは再利用することができません。
サービス対応時に一度でも外した場合は新品のねじと交換
してください。
Notes on Assembly
Notes on Assembling the Heat Sheet (U) (64200), Heat Sheet (B) (64210)
Attach the heat sheet (U) (64200) and the heat sheet (B) (64210) as shown in figure.
Lines
Heat Sheet (U) (64200)
[ 7 ] MS GND sheet (64210) LE
Refer to "Notes on Assembling the
MS GND sheet (64210) LE".
[ 5 ] FP-2423 flexible board
Refer to "Notes on Assembling the
FP-2423 Flexible Board".
[ 6 ] SY-MS protect sheet (64210)
Refer to "Notes on Assembling the
SY-MS Protect Sheet (64210)".
MS-1040 board
[ 4 ]
[ 10 ] MS-1040 board
[ 9 ] MS GND sheet (64200)
Refer to "Notes on Assembling the
MS GND sheet (64200)".
[ 8 ] MS insulating
sheet (A)
[ 3 ] two screws
#247 (M1.4 X 2.5)
(0.12 ± 0.01 N·m)
(Note 1)
Heat Sheet (B) (64210)
Line
[ 2 ] Heat sheet (U) (64200)
Refer to "Notes on Assembling the
Heat Sheet (U) (64200) and Heat
Sheet (B) (64210)".
[ 1 ] Heat sheet (B) (64210)
Refer to "Notes on Assembling the
Heat Sheet (U) (64200) and Heat
Sheet (B) (64210)".
SYS SET