Table of Contents
Advertisement
EMBEDDED SOLUTIONS
J2, J3 SCSI Power Pinout
Located at the rear of the card next to the SCSI connector.
J2 and J3 are three pin headers used to select the definition of pins 33,67(J2) and 34,68(J3) on
the SCSI connector. The headers are installed if the –SCSI option is selected when ordering.
Shunting pins 1-2 applies 3.3V, 2-3 applies ground. The silk-screen shows 3.3 and GND
positions for a shunt to select No shunt = open connection. The pins and shunts can handle
slightly under 1A per header. Not fuse protected.
1 6
Advertisement
Table of Contents
Need help?
Do you have a question about the PCIeBPMCX1 and is the answer not in the manual?
Questions and answers