. A green light indicates when the discharge pump is operating . The DTD02 can be used with virtually any electric discharge pump that operates on the same rated voltage (12 V DC or 24 V DC) and a maximum circuit breaker or fuse rating of 20 amps .
Operator must know local regulations for emptying a holding tank. Note The US Coast Guard allows a key-operated switch as a means to secure an overboard discharge pump system . Turn off DTD02 system and remove key from switch when boating in “No Discharge” waters . Features Secure discharge pump control.
DTD02 Panel Template Dimensions (fig . , page 5) Caution! Do not install DTD02 panel in an atmosphere with Ref. Dimension potentially flammable or explosive vapors . 3 .25 in . / 83 mm 1 . Select panel location away from direct contact with water 3 .25 in .
Page 10
Installation Dometic Tank Discharge Control Key to DTD02 - discharge pump system wiring (fig . , page 3) Ref. Description Ref. Description Discharge pump circuit breaker or fuse DTD02 control panel Discharge pump Black Seacock interlock switch Brown 12 or 24 V DC...
, page 4) 1 . When the Dometic Tank Monitor panel reads “full” and boat is in unrestricted waters, insert key into switch and turn to momentary “start” position (A 1) . Allow key to rebound to “pump on” position (A 2) .
. If this Dometic product is placed in commercial or business use, it will be warranted to the original purchaser only to be free of defects in material and workmanship for a period of ninety (90) days from the date of purchase .
Service department listed elsewhere in this manual . Any damage due to improper use is not covered by the warranty . The warranty does not cover any modifications to the product or the use of non-original Dometic parts; the warranty does not apply if the installation and operating instructions are not adhered to and no liability shall be entertained .
Page 16
. Dometic supplies a wide range of workshop equipment for service and maintenance of built-in air conditioners . Dometic also provides specially...