Download
Share
Print this page
iDataLink maestroRr Installation Manual
  1. Manuals
  2. Brands
  3. iDataLink Manuals
  4. Automobile Accessories
  5. Maestro RR
  6. Installation manual

iDataLink maestroRr Installation Manual

Base radio without sync for ford focus 2012-2014
Hide thumbs Also See for maestroRr:

Advertisement

Quick Links

Download this manual
SELECT VEHICLE
PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE
1
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
2
Print only the pages for your vehicle using the advanced
options in the Print menu.
3
Install your Maestro RR according to the guide for your vehicle.
Pressing the printer icon or "quick printing" this document will print
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
all of the guides in this compilation.

Advertisement

loading
Need help?

Need help?

Do you have a question about the maestroRr and is the answer not in the manual?

Questions and answers

Related Manuals for iDataLink maestroRr

Summary of Contents for iDataLink maestroRr

  • Page 1 SELECT VEHICLE PRINT PAGES NEEDED HOW TO USE THIS INSTALL GUIDE Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. Print only the pages for your vehicle using the advanced options in the Print menu.
  • Page 2 PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro FOC1 Dash Kit (Head unit adapter ready kit) Radar Installation Guides E L E C T R O N I C S PROGRAMMED FIRMWARE...
  • Page 3 Ford Focus Base radio without sync 2012-2014 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
  • Page 4 5. Remove both the screen assembly and the radio body, disconnecting the plugs in the process. (Fig. 1.5) 6. Remove the vents from the factory bezel. (Fig. 1.6) Fig. 1.3 Fig. 1.4 Fig. 1.5 Fig. 1.6 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 5 3. Install the factory vents on the FOC1 kit. (Fig. 2.3) 4. Install the metal brackets on to the aftermarket radio. (Fig. 2.4) Fig. 2.3 Fig. 2.4 Fig. 3.1 Fig. 3.2 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 6 • Plug the Data cable to the data port of the aftermarket radio (port labeled iDatalink). • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
  • Page 7 STEP 5 STEP 3 MAESTRO RR MODULE OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON N.C. HRR-FOC1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE MIC 1 MIC 1 MIC 2 MIC 2 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 8 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 9 Turns off after one minute: Normal operation. • • Normal operation (inactive). VIDEO HELP Installation, product information, vehicle specific videos. VERIFY FLASH Last flash information, steering control configuration, vehicle information. WEBLINK Software to program module. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 10 Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful. TECHNICAL ASSISTANCE Phone: 1-866-427-2999 Email: maestro.support@idatalink.com IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
  • Page 11 PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro FOC1 Dash Kit (Head unit adapter ready kit) Radar Installation Guides E L E C T R O N I C S PROGRAMMED FIRMWARE...
  • Page 12 Ford Focus with 4.3 inch MyFord radio 2012-2014 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
  • Page 13 5. Remove both the screen assembly and the radio body, disconnecting the plugs in the process. (Fig. 1.5) 6. Remove the vents from the factory bezel. (Fig. 1.6) Fig. 1.3 Fig. 1.4 Fig. 1.5 Fig. 1.6 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 14 3. Install the factory vents on the FOC1 kit. (Fig. 2.3) 4. Install the metal brackets on to the aftermarket radio. (Fig. 2.4) Fig. 2.3 Fig. 2.4 Fig. 3.1 Fig. 3.2 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 15 • Plug the Data cable to the data port of the aftermarket radio (port labeled iDatalink). • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
  • Page 16 STEP 5 STEP 3 MAESTRO RR MODULE OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON N.C. HRR-FOC1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE MIC 1 MIC 1 MIC 2 MIC 2 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 17 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 18 Turns off after one minute: Normal operation. • • Normal operation (inactive). VIDEO HELP Installation, product information, vehicle specific videos. VERIFY FLASH Last flash information, steering control configuration, vehicle information. WEBLINK Software to program module. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 19 Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful. TECHNICAL ASSISTANCE Phone: 1-866-427-2999 Email: maestro.support@idatalink.com IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
  • Page 20 PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro FOC1 Dash Kit (Head unit adapter ready kit) Radar Installation Guides E L E C T R O N I C S PROGRAMMED FIRMWARE...
  • Page 21 Ford Focus with 4.3 inch MyFord radio 2015-2018 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
  • Page 22 7. Remove both the screen assembly and the radio body, disconnecting the plugs in the process. (Fig. 1.7) Fig. 1.3 Fig. 1.4 8. Remove the vents from the factory bezel. (Fig. 1.8) Fig. 1.5 Fig. 1.6 Fig. 1.7 Fig. 1.8 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 23 4. Install the factory vents on the FOC1 kit. (Fig. 2.4) Fig. 2.3 Fig. 2.4 5. Install the metal brackets on to the aftermarket radio. (Fig. 2.5) Fig. 2.5 Fig. 3.1 Fig. 3.2 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 24 • Plug the Data cable to the data port of the aftermarket radio (port labeled iDatalink). • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
  • Page 25 STEP 5 STEP 3 MAESTRO RR MODULE OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON N.C. HRR-FOC1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE MIC 1 MIC 1 MIC 2 MIC 2 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 26 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 27 Turns off after one minute: Normal operation. • • Normal operation (inactive). VIDEO HELP Installation, product information, vehicle specific videos. VERIFY FLASH Last flash information, steering control configuration, vehicle information. WEBLINK Software to program module. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 28 Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful. TECHNICAL ASSISTANCE Phone: 1-866-427-2999 Email: maestro.support@idatalink.com IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
  • Page 29 PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro FOC1 Dash Kit (Head unit adapter ready kit) Radar Installation Guides E L E C T R O N I C S PROGRAMMED FIRMWARE...
  • Page 30 Ford Focus with 8 inch MyFord touch screen 2012-2014 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
  • Page 31 5. Remove both the screen assembly and the radio body, disconnecting the plugs in the process. (Fig. 1.5) 6. Remove the vents from the factory bezel. (Fig. 1.6) Fig. 1.3 Fig. 1.4 Fig. 1.5 Fig. 1.6 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 32 3. Install the factory vents on the FOC1 kit. (Fig. 2.3) 4. Install the metal brackets on to the aftermarket radio. (Fig. 2.4) Fig. 2.3 Fig. 2.4 Fig. 3.1 Fig. 3.2 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 33 • Connect the backup camera RCA cable into the aftermarket radio (if applicable). • Plug the Data cable to the data port of the aftermarket radio (port labeled iDatalink). Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 34 N.C. HARNESS BEHIND RADIO YELLOW WHITE STEP 5 BLACK MAESTRO RR MODULE BLUE IF PRESENT AMP TURN ON AMP TURN ON N.C. HRR-FOC1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE AUDIO CABLE Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 35 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 36 Turns off after one minute: Normal operation. • • Normal operation (inactive). VIDEO HELP Installation, product information, vehicle specific videos. VERIFY FLASH Last flash information, steering control configuration, vehicle information. WEBLINK Software to program module. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 37 Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful. TECHNICAL ASSISTANCE Phone: 1-866-427-2999 Email: maestro.support@idatalink.com IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
  • Page 38 PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface Click here for: iDatalink Maestro FOC1 Dash Kit (Head unit adapter ready kit) Radar Installation Guides E L E C T R O N I C S PROGRAMMED FIRMWARE...
  • Page 39 Ford Focus with 8 inch MyFord touch screen 2015-2018 WELCOME TABLE OF CONTENTS Installation Instructions Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are Wiring Diagram now a few simple steps away from enjoying your new car radio with Radio Wire Reference Chart enhanced features.
  • Page 40 Fig. 1.4 holding the screen frame in place and remove the screen frame. (Fig. 1.7) 8. Remove the vents from the factory bezel. (Fig. 1.8) Fig. 1.5 Fig. 1.6 Fig. 1.7 Fig. 1.8 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 41 4. Install the factory vents on the FOC1 kit. (Fig. 2.4) Fig. 2.3 Fig. 2.4 5. Install the metal brackets on to the aftermarket radio. (Fig. 2.5) Fig. 2.5 Fig. 3.1 Fig. 3.2 Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 42 • Connect the backup camera RCA cable into the aftermarket radio (if applicable). • Plug the Data cable to the data port of the aftermarket radio (port labeled iDatalink). Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
  • Page 43 N.C. HARNESS BEHIND RADIO YELLOW WHITE STEP 5 BLACK MAESTRO RR MODULE BLUE IF PRESENT AMP TURN ON AMP TURN ON N.C. HRR-FOC1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE AUDIO CABLE Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 44 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 45 Turns off after one minute: Normal operation. • • Normal operation (inactive). VIDEO HELP Installation, product information, vehicle specific videos. VERIFY FLASH Last flash information, steering control configuration, vehicle information. WEBLINK Software to program module. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-FOC1-DS-IG-EN maestro.idatalink.com...
  • Page 46 Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful. TECHNICAL ASSISTANCE Phone: 1-866-427-2999 Email: maestro.support@idatalink.com IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.