Table of Contents
Advertisement
Steps
1. Remove the screw (M3x3) that secures the internal antenna assembly to the system and lift it away.
2. Unroute the white antenna-cable from cable clip and the routing guides on the system.
3. Push the internal antenna assembly inside from the opening on the back view and lift it away from the system.
Installing the antenna (Location 3)
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of an internal antenna and provides a visual representation of the removal procedure.
34
Removing and installing components
Advertisement
Table of Contents
